HOW TO RESET BRAKE SERVICE LIGHT FOR BMW X1, X3, X5 2019
2 min read
1 year ago
Published on Aug 05, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial provides step-by-step instructions on how to reset the brake service light for BMW X1, X3, and X5 models from 2019. Resetting the brake service light is crucial after performing brake maintenance, ensuring that your vehicle's dashboard reflects accurate service status.
Step 1: Access the Ignition
- Start by turning on the ignition without starting the engine.
- Quickly press the accelerator pedal three times. This should illuminate the dashboard screen.
Step 2: Navigate to the Mileage Display
- Locate the button labeled "BC" on the left side of your steering wheel.
- Tap on the "BC" button until the mileage is displayed at the top of the screen.
Step 3: Enter the Service Menu
- While the mileage is displayed, press and hold the button on the dashboard.
- Continue to hold it until a service menu appears on the screen.
Step 4: Initiate the Reset Process
- When the service question appears, release the button briefly and then press it again.
- Confirm the reset by following the on-screen prompts.
Step 5: Confirm Successful Reset
- After pressing the button, look for a message indicating that the reset was successful.
- If successful, you can now navigate through other service options if desired.
Conclusion
You have successfully reset the brake service light on your BMW X1, X3, or X5. Regularly check your service lights to ensure all maintenance tasks are up to date. For future reference, keep this guide handy whenever you need to perform a reset.