Замена масла на двигателе Рено 1,6 16V K4M Логан, Дастер, Сандеро, Ларгус, Логан2, Сандеро2

Introduction

This tutorial provides a step-by-step guide on how to change the engine oil in Renault vehicles, specifically the models Logan, Sandero, Duster, and Largus, using the 1.6 16V K4M engine. Regular oil changes are crucial for maintaining engine health and optimizing performance. This guide will help you perform the task efficiently and safely.

Step 1: Gather Necessary Tools and Materials

Before starting, ensure you have all the required tools and materials:

• Engine oil (check the manufacturer's specifications for type and quantity)
• Oil filter
• Oil filter wrench
• Socket wrench set
• Oil catch pan
• Funnel
• Rags or paper towels
• Safety gloves
• Safety glasses

Step 2: Prepare the Vehicle

• Park the vehicle on a level surface and turn off the engine.
• Allow the engine to cool down if it has been running.
• Engage the handbrake for safety.

Step 3: Drain the Old Oil

1. Locate the oil drain plug under the vehicle, typically at the bottom of the oil pan.
2. Position the oil catch pan under the drain plug.
3. Use a socket wrench to loosen and remove the drain plug, allowing the old oil to drain completely into the catch pan.
4. Replace the drain plug and tighten it securely once the oil has drained.

Step 4: Replace the Oil Filter

1. Locate the oil filter. It's usually found on the side of the engine.
2. Use an oil filter wrench to remove the old oil filter. Be cautious, as it may still contain old oil.
3. Prepare the new oil filter by applying a small amount of new oil to the rubber gasket on the top.
4. Install the new oil filter by hand, making sure it is snug but not overtightened.

Step 5: Add New Oil

1. Open the hood and locate the oil filler cap, usually marked with an oil can symbol.
2. Remove the cap and place a funnel in the opening.
3. Pour the new engine oil into the funnel, referring to your vehicle's manual for the correct amount.
4. Replace the oil filler cap securely.

Step 6: Check Oil Levels

1. Start the engine and let it run for a few minutes. This allows the new oil to circulate.
2. Turn off the engine and wait a minute for the oil to settle.
3. Use the dipstick to check the oil level:
   • Remove the dipstick and wipe it clean.
   • Reinsert it and remove it again to check the oil level.
   • If necessary, add more oil to reach the recommended level.

Step 7: Clean Up and Dispose of Old Oil

• Properly dispose of the old oil and oil filter at a recycling center or auto supply store.
• Clean any spills using rags or paper towels.

Conclusion

Changing engine oil is a straightforward task that can significantly impact your vehicle's longevity and performance. By following these steps, you can ensure that your Renault runs smoothly. Regular oil changes, typically every 5,000 to 7,500 kilometers, will keep your engine in top condition. For further maintenance tips or if you're unsure about any steps, refer to your vehicle's manual or consult a professional mechanic.