Замена тормозного диска и колодок Ланос - АВТОФАКТОР

Introduction

This tutorial provides a step-by-step guide for replacing the brake discs and pads on a Daewoo Lanos. Performing this maintenance task can improve your vehicle's braking performance and extend the lifespan of your braking system. Follow the instructions carefully to ensure a successful replacement.

Step 1: Gather Necessary Tools and Materials

Before starting the replacement, ensure you have the following tools and materials ready:

• Socket set and ratchet
• Wrench set
• Brake cleaner
• New brake discs
• New brake pads
• C-clamp or brake tool
• Jack and jack stands
• Wheel chocks
• Torque wrench (optional but recommended)
• Safety glasses and gloves

Step 2: Prepare the Vehicle

1. Safety First: Park the vehicle on a level surface and engage the parking brake.
2. Loosen Wheel Nuts: Use a wrench to slightly loosen the wheel nuts on the front wheels.
3. Lift the Vehicle:
   • Position the jack under the vehicle's designated lift points.
   • Raise the vehicle until the wheels are off the ground.
   • Secure the vehicle with jack stands for safety.
4. Remove the Front Wheels: Completely remove the loosened wheel nuts and take off the front wheels.

Step 3: Remove the Brake Caliper

1. Locate the Caliper Bolts: Find the bolts securing the brake caliper to the mounting bracket.
2. Unscrew the Caliper: Use the socket set to remove these bolts. Keep them in a safe place for reinstallation.
3. Support the Caliper: Gently slide the caliper off the brake pads and support it using a bungee cord or rope to avoid strain on the brake line.

Step 4: Replace Brake Pads

1. Remove Old Brake Pads: Take out the old brake pads from the caliper bracket.
2. Clean the Area: Use brake cleaner to clean the caliper bracket and surrounding area.
3. Install New Brake Pads: Place the new brake pads into the caliper bracket, ensuring they fit securely.

Step 5: Remove and Replace Brake Discs

1. Remove the Caliper Bracket: If necessary, unscrew the bolts holding the caliper bracket in place and remove it.
2. Take Off Old Brake Disc: Slide the old brake disc off the hub. If it’s stuck, gently tap it with a rubber mallet.
3. Install New Brake Disc: Position the new brake disc onto the hub, ensuring it sits flush.

Step 6: Reassemble the Caliper

1. Compress the Caliper Piston: Use a C-clamp or brake tool to compress the caliper piston back into its housing.
2. Reattach the Caliper: Place the caliper back over the new brake pads and disc, and secure it by tightening the caliper bolts.
3. Reinstall the Caliper Bracket: If you removed it, reattach the caliper bracket and secure with bolts.

Step 7: Reinstall the Wheels

1. Place the Wheels Back: Position the wheels back onto the hub.
2. Tighten Wheel Nuts: Hand-tighten the wheel nuts and lower the vehicle back to the ground.
3. Final Tightening: Once the vehicle is on the ground, use a torque wrench to tighten the wheel nuts to the manufacturer's specifications.

Conclusion

Replacing the brake discs and pads on a Daewoo Lanos can be a straightforward task if you follow these steps carefully. Always prioritize safety by using appropriate tools and equipment. After completing the replacement, remember to test your brakes before driving to ensure everything is functioning properly. Consider scheduling regular brake maintenance to keep your vehicle in optimal condition.