G37 SEDAN GETS TRIGGASPEC ENGINE OIL AND TRANSMISSION COOLERS! *PREPERATION FOR BOOST*

Introduction

This tutorial will guide you through the installation of Triggaspec engine oil and transmission coolers on a G37 sedan, preparing your vehicle for increased performance and boost. These components help manage engine temperatures, ensuring optimal performance and longevity.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have all the required tools and parts.

Tools Needed

• Socket set
• Wrenches
• Screwdrivers
• Pliers
• Drill (if necessary for mounting)
• Torque wrench

Materials Required

• Triggaspec engine oil cooler
• Triggaspec transmission cooler
• Appropriate hoses and fittings
• Coolant and engine oil (as needed)
• Mounting brackets (if not included)

Tips

• Review the installation manuals for the coolers for specific requirements.
• Organize your workspace to avoid losing small parts.

Step 2: Prepare the Vehicle

Ensure your vehicle is properly prepared for the installation.

• Park on a Level Surface: Make sure the car is on a flat surface for safety.
• Disconnect the Battery: Remove the negative terminal to prevent electrical issues.
• Lift the Vehicle: Use jack stands to securely lift and support the vehicle.

Common Pitfalls

• Forgetting to disconnect the battery may lead to electrical shorts during installation.
• Not using jack stands can be dangerous while working underneath the vehicle.

Step 3: Remove Existing Components

Depending on your vehicle's configuration, you may need to remove existing components to install the coolers.

• Remove Front Bumper: If necessary, detach the front bumper for better access.
• Take Out the Radiator: This might be required to install the oil cooler properly.
• Detach Existing Lines: Carefully remove any oil or transmission lines that may interfere with the new cooler installation.

Practical Advice

• Keep track of screws and fittings; using a small container can help.
• Take photos during disassembly for reference during reassembly.

Step 4: Install the Engine Oil Cooler

Follow these steps for the engine oil cooler installation.

• Position the Cooler: Place the cooler in front of the radiator or in a suitable location.
• Mount the Cooler: Use the provided brackets or drill new holes if necessary.
• Connect Oil Lines: Attach the oil lines to the cooler, ensuring there are no leaks.

Important Note

• Ensure that the oil lines are secured and do not rub against any sharp edges or moving parts.

Step 5: Install the Transmission Cooler

Now, proceed with the installation of the transmission cooler.

• Locate Mounting Area: Similar to the oil cooler, find an appropriate space for the transmission cooler.
• Secure the Cooler: Use brackets to mount the cooler securely.
• Attach Transmission Lines: Connect the transmission fluid lines to the new cooler.

Tips for Success

• Double-check all connections to prevent leaks.
• Use hose clamps for secure fittings.

Step 6: Reassemble and Test

Now that both coolers are installed, reassemble your vehicle.

• Reattach the Radiator and Bumper: Put back any components you removed during installation.
• Reconnect the Battery: Attach the negative terminal securely.
• Fill Fluids: Add engine oil and transmission fluid as needed.

Final Testing

• Start the engine and let it idle. Check for leaks around the coolers.
• Monitor the temperature gauges to ensure the coolers are functioning correctly.

Conclusion

You've successfully installed Triggaspec engine oil and transmission coolers on your G37 sedan! This addition will help manage engine temperatures during performance driving, especially when boosting your vehicle's power. Always remember to perform routine checks on your installations to ensure everything remains secure and functional. Happy driving!