04 - iModel Setup in OpenPlant Project Administrator

Introduction

This tutorial will guide you through the process of setting up the PlantSight iModel using the OpenPlant Project Administrator. By following these steps, you will learn how to configure schemas within your PlantSight project effectively, ensuring a smooth setup for your iModel.

Step 1: Open the OpenPlant Project Administrator

• Launch the OpenPlant Project Administrator application.
• Select the appropriate project or WorkSet that you want to configure.
• Navigate to the “CONNECT Services” ribbon group within the interface.

Step 2: Initiate the iTwin Setup

• Click on the “Setup” icon located in the “CONNECT Services” ribbon group.
• The “iTwin Setup WorkSet” wizard will open. Click the “Next” button to proceed with the setup.

Step 3: Select the iModel

• You will need to select the iModel from your PlantSight project.
• Click the ellipsis icon to display a list of available iTwins.
• Choose the only available iModel in the list and click the “Select” button.

Step 4: Complete the Setup Process

• After selecting the iModel, click the “Setup” button to initiate the setup process.
• The setup will run automatically. To monitor progress, check the “Show Details” box to view the status of the setup.

Step 5: Finalize the Setup

• Once the setup process is complete, click the “Finish” button.
• Ensure that the setup was successful. The wizard will notify you if there were any issues during the setup.
• If the setup was unsuccessful, click on the detailed log file provided to identify the errors.

Step 6: Troubleshoot Issues

• Review the log file carefully to understand the issues that occurred during setup.
• Resolve any identified problems based on the log's feedback.
• Rerun the “Setup” process to complete the configuration.

Conclusion

You have now successfully set up the PlantSight iModel using the OpenPlant Project Administrator. Remember to verify that the setup completes without errors, and be prepared to troubleshoot using the log files if necessary. As a next step, consider exploring additional features of the OpenPlant Project Administrator or integrating more complex schemas into your PlantSight project.