2.7 F-150 Ecoboost Oil Change | How To - FORD Dealer TECH does it @home!!

Introduction

This tutorial will guide you through changing the oil in a 2019 Ford F-150 equipped with a 2.7-liter Ecoboost engine. Performing this task at home can save you time and money, and it’s a straightforward process if you follow these steps.

Step 1: Gather Your Materials

Before you start, make sure you have the following tools and materials:

• Brake cleaner
• Super premium 5W-30 motor oil
• Oil filter (Motorcraft recommended)
• Funnel
• Rags
• 27mm socket or oil filter wrench
• Oil drain pan
• Gloves
• Light source (if necessary)

Step 2: Remove the Air Deflector Panel

1. Locate the air deflector panel under the vehicle.
2. Use a socket wrench to remove the four 8mm bolts securing the panel.
3. Carefully pull the panel away to expose the oil drain plug.

Step 3: Drain the Old Oil

1. Position your oil drain pan under the drain plug.
2. Loosen the drain plug with a 27mm socket, turning it counterclockwise.
3. Allow the oil to drain completely into the pan. Be prepared for a quick flow, so ensure the pan is positioned correctly.

Step 4: Remove the Oil Filter

1. Go to the top of the engine and locate the oil filter.
2. Use the 27mm socket or wrench to loosen and remove the oil filter.
3. Let any remaining oil drain from the filter into the drain pan.

Step 5: Replace the Oil Filter

1. Prepare the new oil filter by lubricating the new O-ring with a bit of fresh oil.
2. Install the new oil filter by screwing it in by hand until snug. Do not overtighten.
3. Ensure the filter is seated properly in its housing.

Step 6: Reinstall the Drain Plug

1. Clean the drain plug with brake cleaner to remove any oil residue.
2. Reinstall the drain plug, tightening it until you hear a click.
3. Wipe down the area with brake cleaner to ensure cleanliness.

Step 7: Add New Oil

1. Using a funnel, add 6 quarts of 5W-30 motor oil into the engine through the oil fill cap.
2. Check the oil level using the dipstick to ensure it is within the recommended range.
3. Replace the oil fill cap securely.

Step 8: Reinstall the Air Deflector Panel

1. Align the air deflector panel back into place.
2. Secure it with the four 8mm bolts removed earlier.
3. Make sure everything is tight and secure.

Conclusion

You have successfully changed the oil in your 2019 F-150 with a 2.7-liter Ecoboost engine. Remember to properly dispose of the old oil at a local auto parts store or designated recycling center. Regular oil changes help maintain the health of your engine, so keep track of your maintenance schedule. Happy driving!