TUTORIAL MULTIMÍDIA ANDROID KIA SPORTAGE EX 2015 - COM SUBWOOFER + CÂMERA DE RÉ + COMANDO DE VOLANTE

Introduction

This tutorial provides a step-by-step guide on upgrading the audio system in a 2015 Kia Sportage EX, specifically focusing on installing a Chinese Android multimedia unit, integrating a subwoofer, and maintaining the original rearview camera functionality. This guide is ideal for car audio enthusiasts looking to enhance their vehicle's sound quality and modernize its multimedia capabilities.

Step 1: Gather Required Materials

Before starting the installation, ensure you have all necessary components and tools:

• Android multimedia unit
• Conventional amplifier (e.g., Taramps TS400 X4)
• Subwoofer
• Rearview camera
• Wiring harness and connectors
• Tools: screwdrivers, wire strippers, and electrical tape

Step 2: Remove the Original Head Unit

To begin the installation:

1. Disconnect the vehicle battery to prevent any electrical issues.
2. Carefully remove the trim panel around the original head unit.
3. Unscrew and pull out the original head unit from the dashboard.
4. Disconnect all wiring harnesses attached to the original unit.

Step 3: Prepare Wiring for the New Multimedia Unit

1. Connect the wiring harness for the new Android multimedia unit:
   • Ensure compatibility with the Kia Sportage wiring.
   • Use the provided diagram for correct connections (refer to the link for the diagram provided in the video description).
2. Adapt the SP-DIF wires for RCA output:
   • Cut and strip the ends of the SP-DIF wires.
   • Connect them to RCA connectors as per the wiring diagram.

Step 4: Install the New Amplifier

1. Secure the new conventional amplifier in a suitable location within the vehicle.
2. Connect the amplifier to the newly installed multimedia unit:
   • Use RCA cables to connect the output from the multimedia unit to the amplifier input.
3. Connect the subwoofer to the amplifier, ensuring proper polarity (positive to positive, negative to negative).

Step 5: Integrate the Rearview Camera

1. Locate the wiring for the original rearview camera.
2. Connect the camera output to the new multimedia unit:
   • Ensure that the camera's power and video feed are properly connected.
3. Test the rearview camera functionality before finalizing the installation.

Step 6: Finalize the Installation

1. Reconnect the vehicle battery.
2. Test the new audio system, ensuring that all components (multimedia unit, amplifier, subwoofer, and rearview camera) are functioning correctly.
3. Reattach the trim panel around the new head unit.

Conclusion

Upgrading the audio system in your 2015 Kia Sportage EX can significantly enhance your driving experience. By following this step-by-step guide, you can successfully install a new Android multimedia unit, integrate a conventional amplifier, and maintain your rearview camera. For those looking to further customize their audio setup, remember to explore additional sound adjustment settings within the new multimedia unit. Happy driving and enjoy your upgraded sound system!