How to change the oil on a 2014 Lincoln MKX.

Introduction

This tutorial will guide you through the process of changing the oil on a 2014 Lincoln MKX. Regular oil changes are essential for maintaining engine performance and longevity. This step-by-step guide will include all the necessary tools and tips to ensure a smooth and efficient oil change.

Step 1: Gather Necessary Materials

Before you begin, make sure you have the following items:

• 5W-20 engine oil (6 quarts)
• K&N oil filter (model HP-2011)
• 15-millimeter wrench (box or ratchet)
• Oil drain pan
• Funnel (for fluids)
• Rags or paper towels (for cleanup)
• Windshield sticker (optional, for mileage tracking)

Step 2: Prepare the Vehicle

1. Park your vehicle on a level surface and turn off the engine.
2. Allow the engine to cool if it has been running.
3. Open the hood and remove the oil filler cap to help facilitate drainage.

Step 3: Drain the Old Oil

1. Locate the Drain Plug: Get under the vehicle and find the oil drain plug.
2. Loosen the Drain Plug: Use the 15-millimeter wrench to loosen the drain plug. Turn it counterclockwise.
3. Position the Drain Pan: Place your oil drain pan under the drain plug to catch the old oil.
4. Remove the Drain Plug: Unscrew the drain plug completely and let the oil drain out fully. Keep firm pressure to avoid spills.

Step 4: Check Other Fluids

While the oil is draining, take the time to check and top off other fluids:

• Coolant: Ensure it is at the appropriate cold line and use the correct type (orange for this model).
• Windshield Washer Fluid: Fill to the top without spilling.
• Brake Fluid: Check levels and top off with DOT 3 or DOT 4 brake fluid if low.

Step 5: Remove and Replace the Oil Filter

1. Locate the Oil Filter: Find the oil filter, which should be easily accessible.
2. Remove the Old Oil Filter: Use your hand to unscrew it. If it's too tight, use a wrench.
3. Prepare the New Oil Filter: Apply a bit of new oil to the rubber seal of the new filter to ensure a good seal.
4. Install the New Oil Filter: Screw in the new filter by hand until snug.

Step 6: Reinstall the Drain Plug

1. Clean the Drain Plug: Wipe any old oil off the drain plug.
2. Reinstall the Plug: Screw it back in place and tighten it securely, but avoid over-tightening.

Step 7: Add New Oil

1. Add Oil: Using a funnel, pour in 5 quarts of new oil.
2. Check Oil Level: After adding, start the engine and let it run for a minute to allow the oil to circulate.
3. Check Again: Turn off the engine and wait a moment. Check the oil level on the dipstick and add additional oil if necessary to reach the full mark.

Conclusion

Changing the oil in your 2014 Lincoln MKX is a straightforward process that can save you time and money. Regular oil changes help keep your engine running smoothly. If you have any questions or need assistance, feel free to leave a comment. Consider subscribing for more automotive tips and tutorials.