GE Washer Agitator Removal - How to do it and access the GE Washer Hub and More
3 min read
11 months ago
Published on Aug 17, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial provides a step-by-step guide to removing the agitator from a GE Washer. This process is crucial because the agitator must be taken out to access the washer hub, tub, or wash plate. Having the right tools and understanding the steps involved will help you complete this task effectively.
Step 1: Gather Your Tools
Before starting the removal process, make sure you have the following tools ready:
- Screwdriver (flathead or Phillips, depending on your washer model)
- New GE Agitator (part number WH43X31240 if needed)
Step 2: Prepare the Washer
- Unplug the Washer: For safety, always unplug the washer from the power source.
- Move the Washer: If necessary, move the washer to have enough space to work around it.
Step 3: Remove the Agitator Cap
- Locate the Top Cap: At the top of the agitator, you will find a plastic cap.
- Pry Off the Cap: Use a flathead screwdriver to carefully pry off the agitator cap. Be gentle to avoid breaking the plastic.
Step 4: Unscrew the Agitator
- Find the Screw: After removing the cap, you will see a screw that holds the agitator in place.
- Remove the Screw: Use your screwdriver to unscrew and remove this screw. Keep it in a safe place for reassembly later.
Step 5: Lift the Agitator Out
- Pull Upward: With the screw removed, grasp the agitator firmly and pull it straight up to remove it from the washer drum.
- Check for Resistance: If the agitator does not come off easily, ensure all screws are removed and that no other components are attached.
Step 6: Access the Hub and Other Components
- After removing the agitator, you can now access the washer hub, tub, or wash plate as needed for further repairs or maintenance.
Step 7: Install the New Agitator (if applicable)
- Position New Agitator: Place the new agitator in the same position as the old one.
- Secure with Screw: Insert the screw back into place and tighten it securely.
- Replace the Cap: Snap the agitator cap back onto the top of the agitator.
Conclusion
Removing the agitator from a GE Washer is a straightforward process that allows you to access necessary components for repairs. Remember to always unplug your washer before beginning any repairs and keep track of all screws and parts for reassembly. If you experience any difficulties, consult the appliance manual or seek professional assistance.