Toyota Pickup Polyurethane Upper Control Arm Bushings 84-95

Introduction

This tutorial provides a step-by-step guide on how to install polyurethane upper control arm bushings on Toyota pickups from the years 1984 to 1995. Upgrading to polyurethane bushings can improve handling and suspension performance, making this a valuable modification for truck enthusiasts.

Step 1: Gather Your Tools and Materials

Before you begin the installation process, ensure you have the following tools and materials:

• Polyurethane upper control arm bushings
• Socket set and ratchet
• Wrenches (combination and/or adjustable)
• Torque wrench
• Hammer
• Press (if available)
• Lubricant (grease)
• Safety glasses and gloves

Tip: Having all the tools ready will streamline the process and prevent interruptions.

Step 2: Prepare Your Vehicle

1. Secure the Vehicle

   • Park the truck on a level surface.
   • Engage the parking brake.
   • Use jack stands to elevate the front of the vehicle safely.

2. Remove the Front Wheels

   • Use a socket wrench to loosen the lug nuts.
   • Remove the wheels to access the control arms.

Step 3: Remove the Old Control Arm Bushings

1. Locate the Control Arm

   • Identify the upper control arm connected to the suspension.

2. Disconnect the Control Arm

   • Remove the bolts securing the control arm to the frame and steering knuckle.
   • Use a hammer to gently tap the control arm free if it is stuck.

3. Extract Old Bushings

   • Use a press or a hammer to remove the old bushings from the control arm.
   • Clean the control arm to remove any debris or old lubricant.

Step 4: Install New Polyurethane Bushings

1. Lubricate the New Bushings

   • Apply a thin layer of grease to the new polyurethane bushings for easier installation.

2. Insert New Bushings

   • Push the new bushings into the control arm using a press or a hammer. Ensure they are seated evenly.

3. Reattach the Control Arm

   • Position the control arm back onto the frame and steering knuckle.
   • Reinsert and tighten the bolts to secure the control arm in place.

Step 5: Reinstall Wheels and Lower Vehicle

1. Reattach the Wheels

   • Place the wheels back on the hub.
   • Hand-tighten the lug nuts before lowering the vehicle.

2. Lower the Vehicle

   • Carefully remove the jack stands and lower the vehicle back to the ground.

3. Torque the Lug Nuts

   • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.

Conclusion

You have successfully installed polyurethane upper control arm bushings on your Toyota pickup. This upgrade should enhance your vehicle's handling and overall suspension performance. Remember to check the new bushings periodically for wear and maintenance needs. For further enhancements, consider exploring other suspension upgrades or modifications.