Замена передних тормозных колодок Рено Логан (Renault Logan) и Лада Ларгус

Introduction

This tutorial provides a step-by-step guide on how to replace the front brake pads on Renault Logan and Lada Largus vehicles. It is based on a practical demonstration, using a 7-year-old Renault Logan with a mileage of 372,000 km. This guide is perfect for car enthusiasts and DIY mechanics looking to perform brake maintenance safely and effectively.

Step 1: Gather Necessary Tools and Materials

Before starting the replacement, ensure you have the following tools and materials ready:

• New brake pads
• Jack and jack stands
• Lug wrench
• Brake cleaner
• C-clamp or brake caliper tool
• Screwdriver (flathead)
• Torque wrench
• Safety glasses and gloves

Practical Tips

• Always work on a flat surface to ensure safety.
• Wear safety gear to protect yourself during the process.

Step 2: Prepare the Vehicle

1. Loosen the Lug Nuts

   • With the vehicle on the ground, use the lug wrench to loosen the lug nuts on the front wheels, but do not remove them completely.

2. Lift the Vehicle

   • Use the jack to lift the front of the vehicle and securely place jack stands under it for added safety.

3. Remove the Wheels

   • Completely remove the loosened lug nuts and take off the front wheels to access the brake components.

Step 3: Remove the Old Brake Pads

1. Locate the Brake Caliper

   • Identify the brake caliper, which houses the brake pads.

2. Remove Caliper Bolts

   • Use the appropriate socket or wrench to remove the bolts securing the caliper to the bracket.

3. Slide Off the Caliper

   • Carefully slide the caliper off the rotor. Support it using a bungee cord or similar to prevent strain on the brake line.

4. Remove Old Brake Pads

   • Take out the old brake pads from the caliper bracket. Note how they are positioned for proper installation of the new ones.

Step 4: Install the New Brake Pads

1. Prepare the New Brake Pads

   • Compare the new pads with the old ones to ensure they match.

2. Compress the Brake Piston

   • Use a C-clamp or brake caliper tool to gently compress the piston back into the caliper. This will create space for the new pads.

3. Install New Brake Pads

   • Place the new brake pads into the caliper bracket, ensuring they fit snugly.

Step 5: Reassemble the Brake Components

1. Reattach the Caliper

   • Position the caliper back over the new brake pads and secure it with the previously removed bolts. Tighten to the manufacturer's specified torque.

2. Reinstall the Wheels

   • Place the wheels back on the hub and hand-tighten the lug nuts.

3. Lower the Vehicle

   • Carefully lower the vehicle back to the ground using the jack.

4. Tighten the Lug Nuts

   • With the vehicle on the ground, use the torque wrench to tighten the lug nuts to the recommended specifications.

Step 6: Test the Brakes

1. Pump the Brake Pedal

   • Before driving, pump the brake pedal a few times to ensure the brake pads are seated correctly.

2. Check for Leaks

   • Inspect the brake system for any signs of fluid leaks around the caliper and brake lines.

3. Take a Test Drive

   • Drive at low speeds to test the brakes, ensuring they respond smoothly and effectively.

Conclusion

Replacing the front brake pads on a Renault Logan or Lada Largus is a manageable task with the right tools and precautions. Always ensure to follow safety measures and check your work after reassembly. Regular brake maintenance is essential for vehicle safety, so consider checking your brake pads every 20,000 to 30,000 kilometers. If you encounter any issues during the process, consult a professional mechanic for assistance.