Как разобрать бензопилу. Разборка бензопилы STIHL MS 180

Introduction

This tutorial guides you through the process of disassembling a STIHL MS 180 chainsaw. Whether you're performing maintenance or repairs, understanding how to break down your chainsaw can help ensure it operates efficiently. By following these steps, you can tackle this task confidently.

Step 1: Gather Required Tools

Before starting the disassembly, ensure you have the necessary tools to make the process smoother:

• Torx screwdriver (specifically T27)
• A set of Torx bits
• A long Torx bit for power tools

You can find these tools through various online retailers. Make sure to have them on hand to avoid interruptions during your project.

Step 2: Safety Precautions

Always prioritize safety when working with power tools. Follow these precautions:

• Disconnect the chainsaw from any power source.
• Wear safety gloves and goggles to protect yourself from debris.
• Work in a well-ventilated area to avoid inhaling fumes from the chainsaw.

Step 3: Remove the Chainsaw Bar and Chain

To disassemble the chainsaw, start with the following steps:

1. Loosen the nuts securing the chainsaw bar using the Torx screwdriver.
2. Slide the bar and chain away from the chainsaw body.
3. Set the bar and chain aside in a safe location.

Step 4: Detach the Side Cover

Next, you will need to remove the side cover:

1. Locate the screws holding the side cover in place.
2. Use the Torx screwdriver to remove these screws.
3. Carefully lift off the side cover and set it aside.

Step 5: Access the Engine Components

With the side cover removed, you can now access the engine:

1. Identify the screws or bolts securing the engine cover.
2. Remove these screws using your Torx screwdriver.
3. Lift off the engine cover gently to expose the internal components.

Step 6: Disassemble Internal Parts

Once the engine is accessible, proceed to disassemble the internal parts carefully:

1. Take note of the arrangement of parts as you remove them for reassembly later.
2. Remove the carburetor by unscrewing it from its mounting.
3. Detach the fuel lines and any electrical connections.

Step 7: Clean and Inspect Components

With the chainsaw disassembled, take time to clean and inspect each part:

• Use a cloth to wipe down components and remove dirt or debris.
• Inspect parts for wear or damage; replace any faulty components as necessary.

Conclusion

You have successfully disassembled your STIHL MS 180 chainsaw. This process not only allows for maintenance but also helps you understand the internal workings of the tool. Remember to keep track of all screws and components for easy reassembly. If any parts need replacement, consider sourcing them from reliable suppliers as mentioned in the video. Happy repairing!