Ryzen 7 5700G Video Editing PC Build & Test

Introduction

In this tutorial, we will guide you through building a video editing PC using the Ryzen 7 5700G processor. This system is designed for video editing and presentation software, making it perfect for ministries or any content creation needs. We’ll walk you through the parts required and the assembly process, ensuring you have a solid understanding of each step.

Step 1: Gather Your Parts

Before you start building, collect all the necessary components. Here’s the parts list:

• CPU: Ryzen 7 5700G
• RAM: 16GB DDR4 G.Skill
• Motherboard: Gigabyte B550 Gaming X V2
• Case: Phanteks Eclipse P400

Storage

• Silicon Power 512GB NVMe SSD
• Silicon Power 1TB NVMe SSD
• Seagate BarraCuda 4TB HDD
• Power Supply: EVGA 600 Watt Bronze
• Keyboard and Mouse: Logitech MK120
• Monitor: AOC 24-inch HDMI Monitor

Ensure you have a clean workspace and tools like a screwdriver handy.

Step 2: Prepare the Case

1. Open the Case: Remove the side panels from the Phanteks Eclipse P400 case.

Install the Power Supply

• Position the EVGA 600W Bronze power supply in the designated area.
• Secure it with screws provided.
2. Cable Management: Organize the power cables to avoid clutter during assembly.

Step 3: Install the Motherboard

1. Prepare the Motherboard:

   • Place the Gigabyte B550 Gaming X V2 motherboard on an anti-static surface.
   • Insert the CPU into the socket; align it correctly based on the notches.
   • Add the RAM to the designated slots (typically slots A2 and B2 for dual-channel).

2. Mount the Motherboard:

   • Carefully place the motherboard into the case.
   • Align it with the standoffs and secure it with screws.

Step 4: Install Storage Drives

1. Install NVMe SSDs:

   • Locate the M.2 slots on the motherboard.
   • Insert the Silicon Power 512GB and 1TB NVMe SSDs at an angle and secure them with screws.

2. Install HDD:

   • Mount the Seagate BarraCuda 4TB HDD in the designated drive bay.
   • Secure it with screws and connect the SATA cable to the motherboard.

Step 5: Connect Power and Cables

1. Power Connections:

   • Connect the 24-pin power cable and 8-pin CPU power cable from the power supply to the motherboard.

2. Data Connections:

   • Use SATA cables to connect the HDD to the motherboard.

3. Front Panel Connections:

   • Connect the case's front panel connectors (USB, audio, power button) to the motherboard according to the manual.

Step 6: Install the GPU (if applicable)

If you decide to add a dedicated graphics card for enhanced performance:

1. Insert the GPU: Place it in the PCIe slot on the motherboard.
2. Secure the GPU: Use screws to secure it to the case.
3. Connect Power: If the GPU requires additional power, connect the power cables from the PSU.

Step 7: Final Assembly and Testing

1. Close the Case: Replace the side panels of the case.
2. Connect Peripherals: Plug in the Logitech MK120 keyboard and mouse, and connect the AOC monitor via HDMI.
3. Power On: Turn on the PC and enter the BIOS to ensure all components are recognized.
4. Install Operating System: Proceed to install your preferred operating system for video editing.

Conclusion

Congratulations on building your Ryzen 7 5700G video editing PC! This setup is ideal for handling both video editing and presentation tasks. Remember to keep your software updated and consider expanding your storage options as needed. Enjoy creating your content efficiently with your new system!