FALCON PRAIRIE STRIPDOWN

Introduction

This tutorial provides a step-by-step guide on how to properly strip down the Falcon Prairie Light Hunter air rifle. Whether you are performing maintenance, cleaning, or upgrades, this process is essential for ensuring optimal performance and longevity of your airgun.

Step 1: Gather Necessary Tools and Materials

Before you start disassembling your Falcon Prairie, make sure you have the following tools and materials ready:

• Screwdrivers (Phillips and flathead)
• Allen wrench set
• Cleaning cloth
• Lubricant
• Safety glasses

Tip: Organize your tools and materials on a clean workspace to avoid losing small parts.

Step 2: Safety First

Always prioritize safety when handling air rifles. Follow these precautions:

• Ensure the rifle is unloaded.
• Remove any pellets from the chamber.
• Engage the safety mechanism.

Common Pitfall: Forgetting to unload the air rifle can lead to accidents.

Step 3: Remove the Stock

To access the internal components, you will first need to detach the stock:

1. Locate the screws securing the stock to the action.
2. Use the appropriate screwdriver to remove the screws.
3. Gently pull the stock away from the action.

Tip: Keep the screws in a labeled container to prevent mixing them up.

Step 4: Disassemble the Action

Next, you will disassemble the main action:

1. Identify and remove the screws that hold the action together.
2. Carefully separate the components, noting the arrangement for reassembly.
3. Take photos during this process for reference.

Tip: Handle all parts gently to avoid damage.

Step 5: Clean and Inspect Components

Once disassembled, take the time to clean and inspect each part:

• Use a cleaning cloth to wipe down metal surfaces.
• Check for wear or damage on O-rings and seals.
• Apply the appropriate lubricant to moving parts.

Real-World Application: Regular cleaning can prevent rust and ensure smooth operation.

Step 6: Reassemble the Rifle

After cleaning, it's time to put your Falcon Prairie back together:

1. Start with the action components, following your reference photos.
2. Tighten all screws securely but avoid overtightening, which can cause damage.
3. Reattach the stock, ensuring all screws are properly fitted.

Tip: Double-check that all components are seated correctly before finalizing assembly.

Conclusion

Stripping down the Falcon Prairie Light Hunter is a straightforward process that, when done correctly, can enhance the performance and lifespan of your air rifle. Remember to keep your workspace organized, prioritize safety, and perform regular maintenance. After reassembly, test the air rifle to ensure everything is functioning properly. Happy shooting!