Установка / замена бампера на Газель Некст

Introduction

This tutorial provides a step-by-step guide on how to remove and install the bumper on a Gazelle Next vehicle. Whether you are replacing a damaged bumper or upgrading for aesthetic purposes, this guide will help you through the process safely and effectively.

Step 1: Gather Necessary Tools and Materials

Before starting, ensure you have all the required tools and materials:

• Socket set (including various sizes)
• Screwdrivers (flathead and Phillips)
• Trim removal tools
• Replacement bumper
• Safety gloves
• Clean cloths

Step 2: Prepare the Vehicle

• Park the Gazelle Next on a flat surface.
• Turn off the engine and remove the keys from the ignition.
• Engage the parking brake to prevent any movement during the process.

Step 3: Remove the Old Bumper

1. Access the Bumper Fasteners:

   • Open the hood and locate the fasteners securing the bumper to the vehicle.
   • Use a screwdriver or socket wrench to remove these fasteners.

2. Detach the Bumper from the Vehicle:

   • Check for any additional screws or clips located underneath or on the sides of the bumper.
   • Use trim removal tools to gently pry off any clips without damaging the surrounding areas.

3. Disconnect Electrical Connections (if applicable):

   • If your bumper has lights or sensors, carefully disconnect the wiring harness.
   • Ensure you take note of where each connection goes for reinstallation.

4. Remove the Bumper:

   • With all fasteners and connections detached, gently pull the bumper away from the vehicle.
   • Be cautious to avoid scratching the paint.

Step 4: Install the New Bumper

1. Align the New Bumper:

   • Position the new bumper in place, ensuring it aligns with the mounting points.
   • Have an assistant help hold the bumper if necessary.

2. Reconnect Electrical Connections:

   • Reconnect any wiring harnesses for lights or sensors, making sure each connection is secure.

3. Secure the Bumper:

   • Begin fastening the bumper to the vehicle with the previously removed screws and clips.
   • Start with the center fasteners and work your way outwards to ensure even alignment.

4. Double Check Fasteners:

   • Go over all the screws and clips to ensure they are tight and secure.
   • Make sure there are no loose parts that could rattle while driving.

Step 5: Final Inspection

• Inspect the alignment of the bumper to ensure it sits evenly with the body of the vehicle.
• Check that all lights and sensors are functioning correctly.
• Clean the area around the bumper with a cloth to remove any fingerprints or debris.

Conclusion

You have successfully removed and installed the bumper on your Gazelle Next. This process not only enhances the vehicle's appearance but can also improve safety if the bumper was damaged. For future maintenance, keep an eye on bumper integrity and check fasteners periodically to ensure they remain secure. If you need to purchase a new bumper, visit the recommended online shop for various options.