AU DIY: How to install Earthwool® FloorShield underfloor insulation

Introduction

This tutorial provides a step-by-step guide on how to install Earthwool® FloorShield underfloor insulation. Proper installation will enhance the thermal performance of your timber floors, ensuring a comfortable indoor temperature year-round and protecting against windy conditions.

Step 1: Gather Your Materials and Tools

Before starting the installation, make sure you have the following materials and tools:

• Earthwool FloorShield insulation (R2.5, 90x420x1160mm, 2.92m² per pack)
• Safety goggles
• Dust mask
• Work gloves
• Utility knife
• Measuring tape
• Straight edge
• Staple gun (for securing insulation)
• Optional: Knee pads for comfort

Tip: Always wear safety gear to protect yourself from dust and sharp objects.

Step 2: Prepare the Area

• Clear the underfloor space: Remove any existing insulation or debris.
• Inspect for moisture: Ensure the area is dry and free from leaks. Address any issues before proceeding.
• Measure the area: Use a measuring tape to determine the dimensions of the space where insulation will be installed.

Common Pitfall: Neglecting to check for moisture can lead to mold growth and insulation damage.

Step 3: Cut the Insulation Panels

• Measure and mark: Use the measuring tape to determine the size needed for each section.
• Cut the insulation: Utilize the utility knife and straight edge to cut the Earthwool panels to fit your measurements.

Tip: Make precise cuts for a snug fit, which will enhance thermal performance.

Step 4: Install the Insulation Panels

• Position the panels: Place the cut panels into the underfloor space between the joists. Ensure they fit snugly.
• Secure the panels: Use a staple gun to attach the edges of the insulation to the joists if needed.

Tip: Work from one end of the area to the other, ensuring a consistent installation.

Step 5: Seal Gaps

• Check for gaps: Inspect for any spaces between panels or around edges.
• Seal with tape: Use insulation tape to seal any gaps or joints to prevent air leaks.

Common Pitfall: Leaving gaps can reduce the insulation's effectiveness.

Step 6: Clean Up

• Dispose of waste: Remove any leftover insulation material and clean the area.
• Store tools: Safely store all tools used during the installation.

Conclusion

By following these steps, you can successfully install Earthwool® FloorShield underfloor insulation, improving your home's thermal performance and comfort. For further information or assistance, consider visiting the Earthwool website or consulting a professional. Enjoy your newly insulated space!