Installation of a Roxtec EzEntry™ transit
Table of Contents
Introduction
This tutorial will guide you through the installation and reinstallation of a Roxtec EzEntry™ transit, a lightweight and efficient cable entry seal designed for various applications. The EzEntry™ seal offers IP 66/67 and UL/NEMA ratings, making it suitable for cabinets, enclosures, and equipment where cables and pipes require secure sealing. Follow these steps to ensure a proper installation.
Step 1: Gather Components and Tools
Before starting the installation, ensure you have all necessary components and tools on hand:
-
Components:
- Roxtec EzEntry™ transit
- Cable or pipe modules
- Sealing frames
-
Tools:
- Drill with appropriate drill bits
- Screwdriver
- Measuring tape
- Utility knife or scissors
- Safety goggles and gloves
Step 2: Choose Installation Options
Decide on the installation option that best suits your needs. The Roxtec EzEntry™ offers flexibility in terms of installation in various environments, including:
- Standard openings for cables and pipes
- Different types of cabinets and enclosures
Step 3: Prepare the Opening
To ensure a proper fit, prepare the opening as follows:
- Measure the dimensions of the opening where the transit will be installed.
- Clean the area to remove any debris or obstructions.
- If necessary, use a drill to adjust the size of the opening according to the specifications of the EzEntry™ transit.
Step 4: Insert Cables or Pipes
Once the opening is prepared:
- Carefully insert the cables or pipes into the transit.
- Ensure that the items are aligned and not under excessive strain.
Step 5: Adapt the Modules
Tailor the Roxtec modules to fit your specific cables or pipes:
- Identify the correct module size for your cables or pipes.
- Use a utility knife or scissors to cut the modules as needed, ensuring a snug fit.
- Check for any gaps that may compromise the seal.
Step 6: Install the Modules
Secure the modules into the transit:
- Place the adapted modules into the Roxtec transit.
- Ensure they are properly seated and aligned within the frame.
- Follow the manufacturer's guidelines for securing the modules if applicable.
Step 7: Tighten the Seal
To ensure a watertight and secure installation:
- Use a screwdriver to tighten any screws or fasteners on the transit frame.
- Check that the seal is firm and that there are no visible gaps.
Step 8: Make a Final Check
Conduct a thorough inspection to confirm everything is correctly installed:
- Ensure all cables and pipes are properly sealed.
- Verify that the transit is securely mounted.
- Check for any loose components or potential leaks.
Step 9: Disassembly and Reinstallation
If you need to remove the transit for any reason:
- Reverse the installation steps to disassemble the transit carefully.
- Follow the installation steps again for reinstallation.
Conclusion
By following these steps, you can efficiently install a Roxtec EzEntry™ transit, ensuring a secure seal for your cables and pipes. Regularly check the integrity of the installation and be prepared for disassembly if maintenance is needed. For further information, refer to the Roxtec Group resources or consult with a professional if you're uncertain about any part of the installation process.