Mercedes W213 Bremse vorne
3 min read
2 hours ago
Published on Feb 07, 2025
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial provides a step-by-step guide on how to change the front brakes on a Mercedes W213, based on the insights from the video by ThomasBenz Oldenburg. Whether you’re a novice or have some experience with car maintenance, this guide will walk you through the process safely and effectively.
Step 1: Gather Necessary Tools and Materials
Before you begin the brake change, ensure you have the following tools and materials ready:
- New brake pads
- Brake rotors (if replacing)
- Brake cleaner
- Jack and jack stands
- Lug wrench
- Torque wrench
- Screwdriver set
- Pliers
- C-clamp or brake caliper tool
Tips:
- Always wear protective gear, such as gloves and safety glasses.
- Make sure your car is parked on a flat surface and the engine is off.
Step 2: Remove the Wheel
- Use the lug wrench to loosen the lug nuts slightly while the car is still on the ground.
- Safely lift the car using a jack and secure it with jack stands.
- Completely remove the lug nuts and take off the wheel to access the brake assembly.
Step 3: Remove the Brake Caliper
- Locate the caliper mounting bolts. Using the appropriate socket, remove these bolts.
- Carefully slide the caliper off the brake rotor.
- Support the caliper using a bungee cord or rope to avoid straining the brake line.
Common Pitfall:
- Do not let the caliper hang by the brake line, as this can cause damage.
Step 4: Remove Old Brake Pads
- Take out the old brake pads from the caliper bracket.
- Inspect the brake rotor for wear; if it’s damaged, consider replacing it.
Step 5: Install New Brake Pads
- Before installing new pads, clean the caliper bracket and rotor using brake cleaner.
- Place the new brake pads into the caliper bracket, ensuring they fit snugly.
Step 6: Compress the Caliper Piston
- Use a C-clamp or brake caliper tool to gently compress the caliper piston back into its housing. This step is crucial to make room for the new, thicker brake pads.
- Ensure the piston is fully retracted before proceeding.
Step 7: Reattach the Brake Caliper
- Carefully slide the caliper back over the new brake pads.
- Tighten the caliper mounting bolts to the recommended torque specifications.
Step 8: Reinstall the Wheel
- Place the wheel back onto the hub and hand-tighten the lug nuts.
- Lower the car back to the ground and use the torque wrench to tighten the lug nuts to the manufacturer’s specifications.
Conclusion
You have successfully replaced the front brakes on your Mercedes W213. Make sure to test the brakes gently at low speed before driving normally. Regular maintenance on your brakes is critical for safety, so consider checking them periodically. If you have questions or want to suggest topics for future tutorials, feel free to leave a comment!