Lexus CT CarPlay Installation – Lexion LX10S Linux Monitor

Introduction

This tutorial provides a comprehensive guide for upgrading your Lexus CT (2011-2020) with the Lexion LX10S Linux CarPlay monitor. This installation allows for seamless OEM integration, offering features like wireless Apple CarPlay and Android Auto without cutting any wires. Follow these steps to enhance your car's infotainment system.

Step 1: Gather Your Materials

Before starting, ensure you have all necessary tools and materials for the installation.

• Lexion LX10S Linux Monitor
• Basic tools (screwdrivers, trim removal tools)
• Compatible factory connectors
• Wireless Apple CarPlay and Android Auto setup instructions

Step 2: Prepare Your Vehicle

To ensure a smooth installation, prepare your vehicle as follows:

1. Park your Lexus CT in a safe, well-lit area.
2. Disconnect the vehicle’s battery to avoid any electrical issues during installation.
3. Remove any trim panels that may obstruct access to the car’s infotainment system. Use trim removal tools to avoid damage.

Step 3: Remove the Old Infotainment System

Carefully take out the existing infotainment system:

1. Locate the screws or clips holding the old system in place.
2. Remove these fasteners using your screwdriver.
3. Gently pull the system from the dashboard, being cautious of any connectors still attached.

Step 4: Install the Lexion LX10S Monitor

Follow these steps to install the new monitor:

1. Plug the Lexion LX10S into the factory connectors. Ensure you do not cut any wires; it should be a plug-and-play installation.
2. Secure the monitor in place, aligning it with the original mounting points.
3. Reinstall any screws or clips removed earlier to ensure the monitor is securely fitted.

Step 5: Connect the Wireless Features

To set up wireless Apple CarPlay and Android Auto, do the following:

1. Ensure your smartphone is compatible with wireless CarPlay or Android Auto.
2. Follow the specific setup instructions provided with the Lexion LX10S for connecting your smartphone.
3. Test the connection to confirm that the wireless features are functioning properly.

Step 6: Reassemble the Dashboard

Once the monitor is installed and connected:

1. Reattach all trim panels that were removed during the preparation phase.
2. Ensure all panels are secured and flush with the dashboard.
3. Double-check that no tools or loose items are left inside the vehicle.

Step 7: Reconnect the Battery

After ensuring everything is in place:

1. Reconnect the vehicle's battery.
2. Turn on the ignition and power up the new Lexion LX10S monitor.

Step 8: Final Testing

Conduct a thorough test of the new system:

1. Check the responsiveness of the touchscreen and ensure all features work, including wireless CarPlay and Android Auto.
2. Test the AHD front/rear camera support if applicable.

Conclusion

You've successfully upgraded your Lexus CT with the Lexion LX10S Linux monitor. This installation provides an enhanced infotainment experience with wireless connectivity. Remember to consult the user manual for any advanced features or troubleshooting tips. Enjoy your upgraded driving experience!