How to Install the Chancellor Two-Handle Centerset Bathroom Faucet

Introduction

This tutorial will guide you through the installation of the Chancellor Two-Handle Centerset Bathroom Faucet from American Standard. Designed for simplicity and efficiency, this faucet includes the Speed Connect Drain system that makes the installation process quicker and easier. Whether you're updating your bathroom or replacing an old faucet, this guide will provide you with all the necessary steps to successfully install your new faucet.

Step 1: Gather Your Tools and Materials

Before you start the installation, make sure you have the following tools and materials ready:

• Adjustable wrench
• Basin wrench
• Plumber’s tape
• Bucket or towel (to catch any water)
• New Chancellor Two-Handle Centerset Bathroom Faucet
• Speed Connect Drain components (included with the faucet)

Tip: Having everything ready will minimize interruptions during the installation.

Step 2: Prepare the Sink Area

1. Turn Off the Water Supply

   • Locate the shut-off valves under the sink and turn them off.
   • If there are no valves, turn off the main water supply.

2. Clear the Area

   • Remove any items from the sink and countertop to create a clean workspace.

3. Drain Remaining Water

   • Turn on the faucet to drain any leftover water in the lines.

Step 3: Remove the Old Faucet

1. Disconnect Water Supply Lines

   • Use an adjustable wrench to disconnect the hot and cold water supply lines from the old faucet.

2. Remove the Old Faucet

   • Loosen and remove any mounting nuts using a basin wrench.
   • Lift the old faucet out of the sink.

Common Pitfall: Ensure all water is drained before removing the old faucet to avoid spills.

Step 4: Install the New Faucet

1. Position the Faucet

   • Place the new Chancellor faucet into the sink holes. Ensure it aligns properly with the center set.

2. Secure the Faucet

   • From underneath the sink, use the provided mounting hardware to secure the faucet in place.

3. Connect the Water Supply Lines

   • Attach the hot and cold water supply lines to the corresponding connections on the new faucet. Use plumber’s tape to ensure a tight seal.

Step 5: Install the Speed Connect Drain

1. Assemble the Drain Components

   • Follow the instructions included with the Speed Connect Drain kit to assemble the parts.

2. Install the Drain

   • Place the drain assembly into the sink hole and secure it according to the instructions.
   • Connect the drain rod to the faucet.

Step 6: Test for Leaks

1. Turn On the Water Supply

   • Gradually turn the shut-off valves back on and check for any leaks beneath the sink.

2. Test the Faucet Functionality

   • Turn on the faucet to ensure both hot and cold water flow correctly and check for leaks around the connections.

Tip: If any leaks are detected, turn off the water supply and double-check your connections.

Conclusion

Congratulations on successfully installing your Chancellor Two-Handle Centerset Bathroom Faucet! By following these steps, you have updated your bathroom with a stylish and functional fixture. Remember to periodically check for leaks and maintain your faucet for optimal performance. If you encounter any issues, refer back to the manufacturer’s instructions or consult a professional plumber. Happy plumbing!