MEMBUAT LEMARI MENGGUNAKAN SATU LEMBAR TRIPLEK

Introduction

In this tutorial, we will guide you through the process of building a minimalist wardrobe using a single sheet of 18mm plywood. This project is perfect for anyone looking to create functional and stylish storage while maximizing materials efficiently.

Step 1: Prepare Your Materials

Before you start building, gather all necessary materials and tools:

Materials Needed

• 1 sheet of 18mm plywood
• HPL (High-Pressure Laminate) for the outer layer
• Decosheet for the inner layer

Tools Required

• Circular saw or table saw
• Measuring tape
• Ruler or straight edge
• Sandpaper
• Wood glue
• Screws and screwdriver
• Clamps

Step 2: Cut the Plywood

Follow these cutting instructions to create the various components of your wardrobe:

1. Main Panel: Cut a piece measuring 120cm in height.
2. Side Panels: Cut two pieces measuring 30cm x 120cm each (for the left and right sides).
3. Top and Bottom Panels: Cut two pieces measuring 56.5cm x 4cm each (for the top and bottom).
4. Back Panel: Cut a piece measuring 60cm x 120cm.
5. Legs: Cut one piece measuring 7cm x 56.5cm (for the front leg).
6. Doors: Cut two pieces measuring 30cm x 112cm each (for the doors).

Step 3: Assemble the Wardrobe Frame

Once all your pieces are cut, begin assembling the frame:

1. Attach Side Panels:

   • Position the two side panels upright.
   • Attach the top and bottom panels using wood glue and screws.
   • Ensure the structure is square by measuring diagonally.

2. Add the Back Panel:

   • Secure the back panel to the frame using screws to add stability.

3. Install the Legs:

   • Attach the front leg to the bottom of the frame using screws.

Step 4: Finish the Surface

To enhance durability and aesthetics, finish the wardrobe:

1. Apply HPL:

   • Adhere HPL to the outer surfaces of the wardrobe.
   • Use a roller or brush to ensure a smooth application.

2. Apply Decosheet:

   • Use decosheet for the inner surfaces to keep it looking clean and attractive.

Step 5: Attach the Doors

Finally, install the doors to complete your wardrobe:

1. Hinge Installation:

   • Attach hinges to the inner edge of each door.
   • Position the doors so they can swing open easily.

2. Test the Doors:

   • Ensure the doors close properly and make any adjustments if necessary.

Conclusion

You've successfully built a minimalist wardrobe using just one sheet of plywood! This project not only provides functional storage but also allows for customization with different finishes. Consider painting or adding handles to personalize your wardrobe further. Happy building!