2012 kia sorento radio removal and replacement

How to Remove and Replace the Radio in a 2012 Kia Sorento

Step 1: Prepare for Removal

1. Start by lifting the shifter knob in your 2012 Kia Sorento to reveal the clips underneath.
2. Ensure the shifter knob is pulled up, not twisted, and remove it by applying pressure to lift it out.

Step 2: Remove Center Console Trim

1. Put the key in the ignition and lower the shifter to the lowest position to access the tabs holding the trim.
2. Locate the notch under the cigarette lighter port and gently pry the trim using a tool on both sides to release the clips.
3. Remove the trim carefully to avoid damaging it.

Step 3: Remove Phillips Screws

1. Locate and remove the phillips head screws holding the silver trim in place.
2. Carefully detach the silver trim by starting at the bottom and working your way up, releasing the clips with light pressure.

Step 4: Remove Dash Panel

1. Remove the remaining phillips head screws to release the dash panel.
2. Lift the dash panel off and set it aside.

Step 5: Prepare the Dash Kit

1. Assemble the dash kit by attaching the provided pieces to the sides of the main dash kit component.
2. Slide the assembled dash kit over the double DIN unit to prepare for installation.

Step 6: Install the Radio

1. Secure the dash kit to the double DIN unit by screwing it in place using the screws provided with the radio.
2. Mount the radio into the dash kit and secure it in place with the necessary screws.

Step 7: Wire Up the Radio

1. Connect the wiring harnesses to the radio according to the manufacturer's instructions.
2. Ensure the Bluetooth and other connections are properly set up.
3. Double-check the wiring to ensure everything is connected correctly.

Step 8: Finalize Installation

1. Once the radio is wired up, mount it back into the car and ensure it is securely in place.
2. Reassemble the center console trim, shifter knob, and any other removed components.
3. Test the radio to ensure it is functioning properly.

Step 9: Completion

1. If you found this tutorial helpful, consider subscribing to the channel for more car audio tutorials and installations by JPtheinstallguy.
2. Check the video description for links to products used in the tutorial.
3. Feel free to share, comment, and provide feedback on the installation process.

By following these steps, you can successfully remove and replace the radio in your 2012 Kia Sorento with ease.