Testei todos os tipos de pólvoras no 38 Spl., impressionante o que deu!!! ..😲

Introduction

This tutorial explores the different types of powders tested for the .38 Special caliber, showcasing the results and providing insights based on the video by Tiro e Pesca Official. Understanding the performance of various powders is crucial for reloaders and shooting enthusiasts looking to optimize their ammunition for accuracy and reliability.

Step 1: Gather Necessary Equipment and Materials

Before starting your tests, ensure you have the following:

• .38 Special Cases: Make sure they are clean and reusable.
• Primers: Choose the appropriate primers for .38 Special.
• Powder Types: Collect a variety of powders to test. Common types include:
  • Bullseye
  • Unique
  • 231
  • Trail Boss
• Bullet Projectiles: Select the type of bullet you will be using in your test.
• Reloading Press: Use a reliable reloading press for consistency.
• Scale: For accurate powder measurement.
• Safety Gear: Always wear safety glasses and hearing protection.

Step 2: Measure and Prepare the Powders

Accurate measurement is essential for consistent results:

1. Select Your Powder: Choose one type of powder to start with.
2. Measure Powder: Use a scale to weigh the desired amount based on your load recipe. Common starting loads can be found in reloading manuals.
3. Fill Cases: Carefully pour the measured powder into the empty .38 Special cases.
4. Seat Bullets: Place your selected bullet on top of the powder and use the reloading press to seat it correctly. Make sure the bullet is seated to the correct depth.

Step 3: Test Fire the Loads

Once your ammunition is prepared, proceed with testing:

1. Set Up Your Range: Ensure your shooting area is safe and compliant with local regulations.
2. Chronograph Setup: If available, set up a chronograph to measure the velocity of your rounds.
3. Fire the Test Loads:
   • Fire your .38 Special rounds one at a time.
   • Observe the performance of each powder type.
   • Pay attention to factors such as recoil, accuracy, and any signs of pressure.

Step 4: Record and Analyze Results

After testing, it's crucial to analyze your findings:

1. Velocity Data: Record the velocity obtained from the chronograph for each powder type.
2. Group Size: Note the accuracy by measuring the group size of your shots on target.
3. Recoil Sensation: Make a note of how each load felt during firing.
4. Visual Inspection: Check fired cases for signs of overpressure or other anomalies.

Step 5: Make Adjustments and Repeat

Based on your results, you may want to make adjustments:

• Change Powder Types: If one powder performed poorly, consider trying another.
• Adjust Charge Weights: Experiment with different powder charges to find the optimal performance.
• Test Different Bullets: Sometimes the bullet type can affect performance significantly.

Conclusion

Testing various powders for the .38 Special can provide valuable insights into optimizing your reloads. By following these steps, you can identify the best performing powders for your needs. Always prioritize safety and keep thorough records of your tests for future reference. Happy shooting!