Заміна сайлентблоків балки Пежо 3008 (307, 308, 5008 та подібні)

Introduction

This tutorial provides a step-by-step guide on how to replace the silent blocks in the Peugeot 3008, along with related models like the 307, 308, and 5008. Silent blocks are crucial for the vehicle's suspension system, influencing ride quality and handling. Follow these instructions carefully to ensure a successful replacement.

Step 1: Gather Necessary Tools and Parts

Before starting the replacement process, ensure you have the following tools and parts:

Tools Required

• Wrench set
• Socket set
• Torque wrench
• Jack and jack stands
• Hammer
• Pry bar
• Lubricant (like WD-40)

Parts Required

• Original silent blocks (part number: 9688101980)
• FEBI BILSTEIN silent blocks (part number: 36802)
• Nut for the bolt (part number: 693665)
• Bolt (part number: 5153 37)

Step 2: Prepare Your Vehicle

To safely access the silent blocks:

1. Park the vehicle on a level surface and engage the handbrake.
2. Loosen the wheel nuts slightly, but do not remove them.
3. Use the jack to lift the vehicle and secure it on jack stands.
4. Remove the wheel to gain access to the suspension components.

Step 3: Remove Old Silent Blocks

Follow these steps to remove the old silent blocks:

1. Locate the Silent Blocks: Identify the silent blocks attached to the suspension arm.
2. Remove Components: If necessary, remove any obstructing components, such as the anti-roll bar or suspension links.
3. Unbolt the Silent Blocks:
   • Use the appropriate socket to remove the bolts securing the silent blocks.
   • If they're stuck, apply lubricant and gently tap with a hammer to loosen them.
4. Extract Silent Blocks: Use a pry bar to carefully remove the silent blocks from their housing.

Step 4: Install New Silent Blocks

Now, install the new silent blocks:

1. Position the New Silent Blocks: Align the new silent blocks with the mounting points.
2. Insert Bolts: Insert the bolts through the silent blocks and tighten them by hand.
3. Torque the Bolts: Use a torque wrench to tighten the bolts to the manufacturer's specified torque settings. This ensures proper installation and prevents future issues.

Step 5: Reassemble the Vehicle

Once the new silent blocks are installed:

1. Reattach Other Components: If you removed any components in Step 3, reattach them in the reverse order.
2. Replace the Wheel: Place the wheel back on and hand-tighten the nuts.
3. Lower the Vehicle: Carefully lower the vehicle off the jack stands.
4. Tighten Wheel Nuts: Fully tighten the wheel nuts in a criss-cross pattern to ensure even pressure.

Conclusion

Replacing the silent blocks in your Peugeot 3008 can greatly improve your vehicle's ride quality and handling. Remember to always use the correct tools and parts for the job, and ensure that all components are securely fastened. After completing the replacement, consider checking the vehicle's alignment to maintain optimal driving performance. If you're unsure about any step, consult a professional mechanic for assistance.