3 Steps To Fix Any iPhone | iPhone Screen Replacement
2 min read
1 year ago
Published on Apr 23, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Fix an iPhone Screen in 3 Simple Steps
Step 1: Opening Up the Phone
- Remove Pentalobe Screws: Use a special pentalobe screwdriver to remove two screws located at the bottom of the iPhone.
- Pry the Screen: Insert a thin and sturdy metal prying tool between the plastic frame of the screen and the metal housing of the iPhone. Carefully lift and wedge the tool to loosen the adhesive holding the screen assembly together.
- Open the Phone: Depending on the iPhone model, open the phone upwards (iPhone 5s and 6s), to the right (iPhone 7 to 11), or to the left (iPhone 12).
Step 2: Removing the Screen
- Disconnect Cables: Use a tri-tip screwdriver to remove five tri-tip screws holding the bracket in place. Disconnect the battery flex cable and the screen assembly cables.
- Remove the Screen: Once all cables are disconnected, gently remove the screen assembly from the device.
Step 3: Transferring Small Parts to the New Screen
- Remove Small Parts: Unscrew and remove small parts like the ear speaker assembly from the old screen.
- Transfer Parts: Place the small parts onto the new screen in their respective positions.
- Reassemble: Reconnect the screen assembly cables, the speaker assembly cable, and the battery flex cable. Secure the metal bracket with five tri-tip screws.
- Close Up the Phone: Position the top of the screen first, then push the sides and bottom to close the phone. Insert the Pentalobe screws back in place.
- Power On: Turn on your iPhone to ensure it powers up properly and the screen is fully functional.
By following these three steps, you can successfully fix any iPhone screen at home. Remember to handle the delicate parts with care and refer to the video for visual guidance.