2000 - 2006 Chevy Silverado Remote Key Fob Programming - How To Pair Program Chevrolet Fob

Introduction

This tutorial will guide you through the process of programming or pairing a remote key fob to a 2000 - 2006 Chevy Silverado. This procedure is essential for ensuring your key fob works correctly with your vehicle's locking system. You will need an ignition key and all the fobs you wish to program.

Step 1: Prepare Your Vehicle

• Close all vehicle doors to ensure a proper programming environment.
• Have all remote key fobs ready for programming.

Step 2: Insert the Key

• Insert your key into the ignition of your Chevy Silverado.

Step 3: Activate the Unlock Button

• Hold down the power UNLOCK button on the driver’s door panel.
• Continue holding this button until instructed to release it in Step 9.

Step 4: Cycle the Ignition

Perform the following steps quickly:

1. Turn the ignition switch to the ON position (not starting the engine).
2. Turn the ignition switch to the OFF position.
3. Turn the ignition switch back to the ON position.
4. Turn the ignition switch to the OFF position.

Step 5: Release the Unlock Button

• Release the power UNLOCK button on the door panel.
• You should see the vehicle's doors lock and unlock automatically, indicating that the system is in programming mode.

Step 6: Program the First Remote Key Fob

• Hold down both the LOCK and UNLOCK buttons on the remote key fob simultaneously.
• Keep holding these buttons until the door locks and unlocks. This may take up to 30 seconds.

Step 7: Program Additional Remote Key Fobs

• Repeat Step 6 for each additional remote key fob you wish to program, including any existing fobs.

Step 8: Exit Programming Mode

• Turn the ignition switch to the ON position to exit the programming mode.

Conclusion

You have successfully programmed your remote key fob to your Chevy Silverado. If you encounter any issues or need to program additional fobs in the future, simply repeat these steps. For further assistance, you can check DIY keyless entry remote fob programming instructions or consult a local locksmith.