FULLWAVE+POWER UPLINE PERFECT SETUP SA TMX155 WALA TALAGANG LOWBAT ...

Introduction

In this tutorial, we will guide you through setting up the FULLWAVE+POWER UPLINE for the TMX155 to prevent low battery issues, even when using additional sound systems. This setup will enhance your bike's electrical performance, ensuring you have sufficient power for all your needs.

Step 1: Gather Necessary Materials

Before starting, ensure you have the following materials on hand:

• TTGR 5-Wire Charger
• Horn Relay
• Wiring tools (strippers, connectors)
• Electrical tape

You can find the materials here:

• TTGR 5-Wire Charger
• Horn Relay

Step 2: Install the TTGR 5-Wire Charger

1. Locate the Battery: Open your TMX155 and locate the battery compartment.
2. Connect Wires:
   • Identify the correct wires from the TTGR charger. Typically, these will include power, ground, and output connections.
   • Use wire strippers to prepare the ends of each wire.
   • Connect the power wire from the charger to the positive terminal of the battery.
   • Connect the ground wire to the negative terminal.
3. Secure Connections: Ensure all connections are tight and wrap them with electrical tape to prevent any shorts.

Step 3: Install the Horn Relay

1. Identify Relay Location: Find a suitable location for the horn relay within your bike's frame.
2. Connect the Relay:
   • Connect the input side of the relay to the battery.
   • Connect the output side to the horn or sound system you plan to use.
   • Ensure that the relay is rated for the power you will be drawing.
3. Test the Relay: After installation, test the relay by activating the horn or sound system to ensure it is functioning correctly.

Step 4: Final Checks and Testing

1. Check All Connections: Go over all connections again to ensure they are secure and correctly placed.
2. Power On the Bike: Start your TMX155 and monitor the battery voltage if you have a multimeter handy.
3. Test Sound System: Activate your sound system to confirm that it works without draining the battery quickly.

Conclusion

You have successfully set up the FULLWAVE+POWER UPLINE for your TMX155, which should help alleviate low battery issues even when using additional electrical components. Make sure to periodically check the connections and battery health to maintain optimal performance. If you encounter any issues, revisit the connections or consider consulting a professional for assistance. Enjoy your rides with enhanced power!