GKTECH LUG NUT REVIEW! (Steel Extended)

Introduction

In this tutorial, we will walk through the installation of GKTECH Steel Extended Lug Nuts on a G37. These lug nuts not only enhance the aesthetic appeal of your vehicle but also ensure better performance and safety. Follow these steps to successfully install your new lug nuts.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have the following tools and materials ready:

• GKTECH Steel Extended Lug Nuts
• Torque wrench
• Lug nut socket
• Jack and jack stands
• Tire iron
• Wheel cleaner (optional)

Tip

: Always double-check that the lug nuts are compatible with your vehicle model.

Step 2: Prepare Your Vehicle

1. Secure the Vehicle: Park your G37 on a flat surface and engage the parking brake.

Lift the Vehicle

• Use a jack to lift the car.
• Place jack stands under the vehicle for safety.

Remove the Wheels

• Loosen the lug nuts using a tire iron.
• Remove the lug nuts completely and take off the wheels.

Common Pitfall

: Never work under a car supported only by a jack; always use jack stands.

Step 3: Clean the Wheel Hub

• Before installing the new lug nuts, clean the wheel hub area where the lug nuts will attach.
• Use a wheel cleaner to remove dirt and debris.

Tip

: A clean surface helps ensure a secure fit for the lug nuts.

Step 4: Install the GKTECH Lug Nuts

1. Align the Wheel: Position the wheel back onto the hub.

Hand Tighten the Lug Nuts

• Place the GKTECH lug nuts onto the wheel studs.
• Hand tighten each lug nut to hold the wheel in place.

Use a Torque Wrench

• Set your torque wrench to the manufacturer’s recommended torque specification.
• Tighten each lug nut in a crisscross pattern to ensure even pressure.

Tip

: Check your vehicle's manual for the specific torque value for your lug nuts.

Step 5: Lower the Vehicle

• Carefully lower the vehicle back to the ground using the jack.
• Once the vehicle is securely on the ground, perform a final check on the lug nut tightness with the torque wrench.

Conclusion

Installing GKTECH Steel Extended Lug Nuts is a straightforward process that can enhance both the look and performance of your G37. Remember to use the proper tools, follow safety precautions, and ensure everything is tightened to specifications. After installation, take your vehicle for a short drive and recheck the lug nut tightness. Enjoy your upgraded ride!