BAJAJ BOXER BM 150X Disk Мотосигнализация с автозапуском подключение. Доп.свет. Подробно.

Introduction

In this tutorial, we will guide you through the process of connecting a motorcycle alarm system with remote start functionality to the BAJAJ BOXER BM 150X Disk. Additionally, we will cover how to install extra lights on the motorcycle and secure them properly. This guide is beneficial for enhancing your motorcycle's security and visibility.

Step 1: Gather Necessary Materials

Before starting the installation, ensure you have the following materials:

• Motorcycle alarm system with remote start
• Additional lights (e.g., LED lights)
• Handlebar switch
• Basic tools (screwdrivers, wire strippers, etc.)
• Electrical tape and zip ties

Step 2: Connect the Motorcycle Alarm System

Follow these steps to install the alarm system:

1. Locate the Wiring Harness: Find the motorcycle's main wiring harness. This is usually under the seat or near the battery.

2. Identify Wires: Identify the wires required for the alarm:

   • Power (usually red)
   • Ground (usually black)
   • Ignition (often yellow or blue)
   • Starter wire (typically green)

3. Connect the Wires:

   • Connect the power wire from the alarm to the motorcycle's positive battery terminal.
   • Connect the ground wire to a suitable grounding point on the frame.
   • Connect the ignition wire to the ignition switch wire.
   • Connect the starter wire according to the alarm's manual instructions.

4. Secure Connections:

   • Use electrical tape to wrap exposed connections.
   • Ensure all wires are secured and not in contact with moving parts.

Step 3: Install the Handlebar Switch

To control the alarm system conveniently, install a handlebar switch:

1. Position the Switch: Choose a location on the handlebar that is easily accessible.

2. Drill a Hole (if necessary): If your switch requires a mounting bracket, drill a hole in the handlebar.

3. Connect Wires:

   • Connect the switch wires to the corresponding wires on the alarm system as per the manual.
   • Ensure connections are secure and insulated.

4. Test the Switch: After installation, test the switch to make sure it activates the alarm correctly.

Step 4: Install Additional Lights

For improved visibility, follow these steps to install extra lights:

1. Choose a Mounting Location: Find suitable spots on your motorcycle for the additional lights.

2. Mount the Lights:

   • Use brackets or zip ties to secure the lights in place.
   • Ensure they are not obstructing any moving parts.

3. Connect the Lights:

   • Identify the power source for the lights.
   • Connect the positive wire of the lights to the power source and the negative wire to the ground.

4. Test the Lights: After installation, turn on the motorcycle to check that the lights function correctly.

Conclusion

You have successfully connected a motorcycle alarm system with remote start to your BAJAJ BOXER BM 150X Disk and installed additional lights. Remember to routinely check the functionality of both the alarm system and lights to ensure they are working correctly. For further questions or assistance, consider reaching out through relevant forums or the provided video links. Happy riding, and stay safe!