Garage Door Opener and Track Replacement - Step by Step Guide

Step-by-Step Tutorial: How to Replace a Garage Door Opener and Track

Materials Needed:

• New garage door opener
• Rail system extension (if needed)
• Clevis pins
• Belt
• Sprocket
• Turnbuckle
• Cotter pin
• Safety beams
• Wall console
• Self-tapping screws
• 2x4 for safety testing

Step 1: Unplug the Existing Garage Door Opener

1. Locate the plug in the ceiling and unplug the garage door opener.
2. Ensure the power is turned off so the system can be safely disconnected.

Step 2: Disconnect Old Wires

1. Mark the old wires to remember their placement.
2. Disconnect the old wires from the existing garage door opener.

Step 3: Remove Existing Garage Door Motor

1. Identify and remove the bolts holding the garage door motor in place.
2. Disconnect the arm attached to the motor.
3. Remove the track hinges and pins to separate the motor from the system.

Step 4: Assemble the New Rail System

1. Measure the height of your garage door to determine if you need an extension for the rail system.
2. Put together the new rail system according to the instructions provided.
3. Attach the belt to the pulley and sprocket, ensuring it is flat and not twisted.

Step 5: Attach Rail to Motor

1. Mount the rail onto the motor's drive shaft using the provided bracket.
2. Fasten the rail securely to the motor following the instructions.

Step 6: Install the Rail System

1. Position the rail system onto the ceiling, ensuring it is securely attached.
2. Adjust the brackets and mounting as needed to accommodate the length of the track.

Step 7: Wire Safety Beams and Wall Console

1. Connect the safety beams to the power head using the specified wires.
2. Replace the wall console, ensuring the correct wires are connected and not touching each other.

Step 8: Program the Garage Door Opener

1. Program the door opener to stop at the desired positions.
2. Test the functionality by opening and closing the door.

Step 9: Test Safety Features

1. Check the safety beams for proper alignment and communication.
2. Test the door's response to obstacles, such as a 2x4 placed in its path.

Step 10: Final Checks

1. Ensure all components are securely installed and functioning correctly.
2. Verify that the garage door opener works as expected, including during power outages.

Congratulations! You have successfully replaced your garage door opener and track. If you encounter any issues or have questions, refer to the manufacturer's instructions or seek professional assistance.