iPhone 7 Plus Screen Replacement

Introduction

This tutorial provides a comprehensive guide on how to replace a cracked screen on an iPhone 7 Plus. Whether you're looking to save money on repairs or simply enjoy DIY projects, this step-by-step process will help you successfully replace your device's display.

Step 1: Gather Necessary Tools and Materials

Before starting the replacement, ensure you have all the required tools and replacement parts. You will need:

• Replacement display (black or white)
• Screwdriver set
• Opening tools
• Magnetic mat (to keep screws organized)
• Adhesive waterproof tape

Where to Purchase

• Amazon Links:
  • Screwdrivers set
  • Opening tool
  • Magnetic Mat
  • Adhesive Waterproof tape
  • Black display for iPhone 7 Plus
  • White display for iPhone 7 Plus
• AliExpress Links:
  • Replacement display
  • Adhesive waterproof tape
  • Screwdrivers

Step 2: Power Off the Device

• Ensure the iPhone 7 Plus is completely powered off before beginning the repair. This helps prevent any electrical issues during the process.

Step 3: Remove the Screws

• Locate the two screws near the charging port at the bottom of the device.
• Use the appropriate screwdriver to carefully remove these screws and place them in your magnetic mat to avoid losing them.

Step 4: Open the Device

• Use an opening tool to gently pry the screen away from the body of the iPhone.
• Start from one corner and carefully work your way around, ensuring you do not apply too much pressure to avoid damaging internal components.

Step 5: Disconnect the Battery

• Once the screen is slightly lifted, locate the battery connector.
• Use your screwdriver to remove any screws securing the battery connector and gently disconnect it to ensure safety while replacing the screen.

Step 6: Remove the Old Display

• Disconnect the display cables carefully from the motherboard using your opening tool.
• Once disconnected, you can fully remove the old display from the device.

Step 7: Install the New Display

• Take your new display and connect the display cables to the motherboard.
• Make sure they are securely attached to avoid issues later.

Step 8: Reconnect the Battery

• Reconnect the battery connector to the motherboard. Ensure it is firmly attached.

Step 9: Close the Device

• Carefully align the new display with the device frame.
• Gently press down to snap the screen back into place.

Step 10: Replace the Screws

• Use your screwdriver to replace the screws you removed earlier at the bottom of the device.
• Ensure they are tightened securely but avoid over-tightening.

Step 11: Test the New Screen

• Power on your iPhone 7 Plus.
• Test the new screen for responsiveness and check if all features are functioning correctly.

Conclusion

You have successfully replaced the cracked screen on your iPhone 7 Plus. Remember to keep your tools organized and work carefully to prevent any damage. If you encounter issues, consider consulting additional resources or seeking professional assistance. Enjoy your newly repaired device!