How to Change Oil 2008-2013 Nissan Rogue

Introduction

This tutorial provides a step-by-step guide on how to change the engine oil and oil filter in a 2008-2013 Nissan Rogue. Regular oil changes are crucial for maintaining your vehicle's performance and longevity. This guide is not only applicable to the Nissan Rogue but can also serve as a reference for similar models from 2008 to 2013.

Step 1: Gather Your Tools and Materials

Before starting the oil change, ensure you have the following tools and materials ready:

• Phillips Head Screwdriver
• 14mm Wrench
• 14mm Socket
• 21mm Socket
• Trim Tool Set
• 1/2 Inch Impact Gun
• 3/8 Inch Impact Gun
• Ratchet
• Torque Wrench
• Cloth Rags
• Engine Oil
• Gloves
• Paper Towels
• Safety Glasses
• Drain Pan
• Floor Jack
• Funnel
• Jack Stands
• Pick
• Wheel Chocks

Step 2: Prepare the Vehicle

1. Safety First: Park the vehicle on a flat surface and turn off the engine. Engage the parking brake.
2. Use Wheel Chocks: Place wheel chocks behind the rear wheels to prevent movement.
3. Lift the Vehicle:
   • Use a floor jack to lift the front of the vehicle.
   • Secure with jack stands to ensure safety while working underneath.

Step 3: Drain the Old Oil

1. Locate the Oil Drain Plug: Find the oil drain plug under the vehicle. It’s typically located at the lowest point of the oil pan.
2. Position the Drain Pan: Place the drain pan under the oil drain plug to catch the old oil.
3. Remove the Drain Plug:
   • Use the 14mm wrench to loosen and remove the drain plug.
   • Allow the old oil to completely drain into the pan.
4. Reinstall the Drain Plug: Once drained, clean the drain plug and reinstall it, tightening it securely.

Step 4: Replace the Oil Filter

1. Locate the Oil Filter: The oil filter is usually situated near the oil pan.
2. Remove the Old Oil Filter:
   • Use the appropriate tool (such as an oil filter wrench) to loosen and remove the oil filter.
   • Be prepared for some residual oil to spill out.
3. Prepare the New Oil Filter:
   • Apply a small amount of new engine oil to the rubber gasket of the new oil filter. This helps ensure a good seal.
4. Install the New Oil Filter:
   • Screw on the new filter by hand until it is snug. Avoid overtightening.

Step 5: Add New Oil

1. Choose the Right Oil: Refer to your owner's manual to select the appropriate type and amount of engine oil.
2. Remove the Oil Filler Cap: Locate and remove the oil filler cap on top of the engine.
3. Add Oil:
   • Using a funnel, pour the new engine oil into the filler neck.
   • Check the oil level with the dipstick to ensure you’ve added the correct amount.
4. Replace the Oil Cap: After adding oil, securely replace the oil filler cap.

Step 6: Final Checks

1. Start the Engine: Turn on the vehicle and let it run for a few minutes.
2. Check for Leaks: Inspect under the vehicle for any signs of oil leaks from the drain plug or oil filter.
3. Dispose of Old Oil: Take the used oil and filter to a recycling center or auto parts store that accepts oil for proper disposal.

Conclusion

Changing the oil in your 2008-2013 Nissan Rogue is a straightforward process that can be done at home with the right tools and materials. Regular oil changes will help maintain your vehicle's engine health and prolong its lifespan. After completing your oil change, consider setting a reminder for your next service to keep your vehicle running smoothly.