DIY ! トラロープでタイヤ交換ができることを知ってる人はほとんどいません!

Introduction

In this tutorial, we will demonstrate how to change a tire using a DIY technique with a tow rope. This method is not widely known but can make the tire-changing process easier once you grasp the technique. We will guide you through the essential steps and tips to successfully perform this task.

Step 1: Gather Materials

Before starting, make sure you have the following tools and materials ready:

• Tow Rope: Approximately 6mm in thickness and around 2 meters long.
• Tire: The one you intend to change.
• Vehicle: The vehicle from which you will remove the tire.
• Safety Gear: Gloves and goggles for protection.

Step 2: Prepare the Vehicle

Ensure your vehicle is in a safe position before attempting to change the tire.

1. Park on a Flat Surface: Choose a stable area to prevent rolling.
2. Engage the Parking Brake: This will keep the vehicle stationary.
3. Loosen the Lug Nuts: Use a lug wrench to slightly loosen the lug nuts on the tire before lifting the vehicle.

Step 3: Lift the Vehicle

Using a jack, lift the vehicle to remove the tire.

1. Position the Jack: Place it under the vehicle's designated jacking point.
2. Raise the Vehicle: Pump the jack until the tire is off the ground.

Step 4: Remove the Tire

Now that the vehicle is lifted, you can fully remove the tire.

1. Remove the Lug Nuts: Take off the previously loosened lug nuts completely.
2. Take Off the Tire: Carefully pull the tire off the wheel hub and set it aside.

Step 5: Use the Tow Rope Technique

This step involves using the tow rope to assist in the tire change.

1. Create a Loop: Make a loop with the tow rope and place it around the tire.
2. Tighten the Rope: Pull the ends of the rope to secure it tightly around the tire.
3. Leverage the Rope: Use the rope to help maneuver the tire into place on the wheel hub.

Step 6: Install the New Tire

With the tire in position, it’s time to secure it.

1. Align the Tire: Ensure that the tire is correctly aligned with the wheel hub.
2. Insert the Lug Nuts: Hand-tighten the lug nuts onto the wheel bolts.
3. Lower the Vehicle: Carefully lower the jack until the tire is on the ground.

Step 7: Final Tightening

Once the vehicle is on the ground, it’s important to securely fasten the lug nuts.

1. Tighten Lug Nuts: Use the lug wrench to fully tighten the lug nuts in a star pattern to ensure even pressure.
2. Check Stability: Make sure everything is secure before driving.

Conclusion

Changing a tire with a tow rope is a practical skill that can save you time and hassle. By following these steps, you will be able to efficiently swap out a tire using this unique technique. For further learning, consider watching related videos on making your own bead breaker and impact driver bits. Remember to practice safety and check your work to ensure a secure installation. Happy DIY-ing!