2018 Tesla model X Cabin Filter Replacement PC99607HX

Introduction

This tutorial provides step-by-step instructions for replacing the cabin air filter in a 2018 Tesla Model X. Regularly changing your cabin air filter is crucial for maintaining clean air inside your vehicle. This guide will walk you through the process efficiently, ensuring you breathe better air while driving.

Step 1: Gather Your Tools

Before starting, collect the following tools and materials:

• 10mm socket wrench
• Box cutter or utility knife
• Flathead screwdriver
• Clip removal tool
• New PureFlow cabin air filter

Step 2: Prepare the Vehicle

1. Lift the Hood: Open the hood of your Tesla Model X to access the cabin filter area.
2. Remove Plastic Clips: Use the clip removal tool to take out the two plastic clips securing the plastic paneling.

Step 3: Remove the Plastic Paneling and Gasket

1. Detach Paneling: Carefully remove all plastic paneling to expose the trunk area.
2. Take Off the Rubber Gasket: Remove the rubber gasket that surrounds the trunk lining.

Step 4: Access the Trunk Lining

1. Loosen the Lining: Use the flathead screwdriver to detach the trunk lining.
2. Disconnect Wiring: Disconnect the light and emergency release mechanism from the trunk lining.

Step 5: Remove the Bolts and Tub

1. Unscrew the Bolts: Using the 10mm socket wrench, remove all bolts securing the plastic tub in the trunk area.
2. Take Out the Tub: Carefully remove the tub to access the cabin air filter.

Step 6: Replace the Cabin Air Filter

1. Remove Old Filter: Use the box cutter to carefully cut around the old cabin air filter and remove it.
2. Install New Filter: Slide the new PureFlow cabin air filter into the housing, ensuring it's securely in place.

Step 7: Reassemble the Components

1. Reinstall the Tub: Place the plastic tub back into position and secure it with the bolts using the 10mm and 13mm socket wrenches.
2. Reattach Trunk Lining: Slide the trunk lining back into place and reattach the emergency release and trunk lights.
3. Reinstall Rubber Gasket: Place the rubber gasket back on its original position.

Step 8: Finalize the Installation

1. Reattach Plastic Paneling: Put all the plastic paneling back in place.
2. Secure with Clips: Reattach the two plastic clips to secure the paneling.

Conclusion

Congratulations on successfully replacing the cabin air filter in your 2018 Tesla Model X! Regular maintenance of your cabin air filter ensures cleaner air quality inside your vehicle. For future reference, consider checking the filter every 12,000 to 15,000 miles or as recommended by your vehicle's manual. Enjoy breathing better air during your drives!