Intel核显直通 显示输出 HDMI/DP/Type-C简单方法完整版无需定制OVMF 可显示开机BIOS启动画面

Introduction

This tutorial provides a comprehensive guide to configuring Intel integrated graphics output through HDMI, DisplayPort, or Type-C connections. It aims to simplify the process, ensuring users can view their BIOS startup screens and other displays without custom OVMF settings. This guide is particularly relevant for users of Intel's N5105 and newer processors.

Step 1: Preparing Your System

• Ensure your system meets the necessary hardware requirements, focusing on Intel processors starting from N5105.
• Install the latest BIOS version from your motherboard manufacturer to ensure compatibility with integrated graphics features.
• Gather the necessary cables (HDMI, DP, Type-C) for connecting your display.

Step 2: Download Required Files

• Visit the GitHub repository of the IGD project here to download the latest version of the necessary files.
• Make sure to download any additional resources or configurations mentioned in the video.

Step 3: Configure Your BIOS Settings

• Boot into your BIOS setup by pressing the designated key (usually F2, Del, or Esc) during startup.
• Navigate to the "Integrated Peripherals" or "Advanced" section.
• Enable the integrated graphics option. This is often labeled as "IGD" or "Integrated Graphics Device."
• Set the primary display output to "IGD" or "Integrated Graphics."

Step 4: Adjusting Graphics Settings

• Within the BIOS, look for settings related to video output or graphics configuration.
• Ensure the video memory is allocated correctly (e.g., set to at least 256MB).
• Save your changes and exit the BIOS setup.

Step 5: Connecting Display Cables

• Connect your monitor using the preferred output (HDMI, DP, or Type-C).
• Make sure your display is powered on and set to the correct input source.

Step 6: Booting Your System

• Power on your computer. If steps were followed correctly, you should see the BIOS startup screen on your connected display.
• Proceed to install your operating system or configure it as needed.

Step 7: Troubleshooting Common Issues

• If the display does not show the BIOS screen:
  • Double-check all connections and ensure the cables are securely connected.
  • Revisit BIOS settings to confirm that the integrated graphics option is enabled.
  • Try using a different output port or cable to rule out hardware issues.

Conclusion

You have now successfully configured Intel integrated graphics to output through HDMI, DisplayPort, or Type-C connections. By following these steps, you should be able to see your BIOS startup screen and enjoy a seamless experience with your display. For further customization or troubleshooting, consider engaging with online communities or forums related to hardware tinkering.