Beton Porous, Beton Tembus Air Yang Estetik. Ini Tutorialnya || Kuli Bangunan #diy #tutorial

Introduction

This tutorial will guide you through the process of creating porous concrete, known as "Beton Porous". This type of concrete is both aesthetically pleasing and functional, allowing water to permeate through it while providing a strong surface. This guide is based on a tutorial from the DidingKLIK channel and will help you achieve a high-quality finish in your DIY projects.

Step 1: Gather Materials

To start, you will need the following materials:

• Single aggregate (gravel or crushed stone)
• Cement
• Special formula (may include additives for durability and permeability)
• Water
• Tools: mixer, shovel, trowel, and leveling tool

Tips:

• Ensure the aggregate is clean and free from debris.
• Use the right ratio of aggregate to cement for optimal results.

Step 2: Prepare the Mixing Area

• Choose a flat, stable surface for mixing.
• Lay down a tarp or plastic sheet to catch any spills.
• Ensure you have enough space to work comfortably.

Advice:

• Keep your mixing area organized to avoid accidents and mix contamination.

Step 3: Mix the Ingredients

1. In a mixer, combine the single aggregate and cement in a dry mix before adding water.
2. Gradually add water while mixing until you achieve a consistency similar to thick paste.
3. If using a special formula, incorporate it as per the manufacturer's instructions.

Common Pitfalls:

• Avoid adding too much water, as this can weaken the concrete.
• Mix thoroughly to ensure even distribution of all components.

Step 4: Pour the Mixture

• Once mixed, pour the concrete into your prepared mold or designated area.
• Use a shovel or trowel to spread the mixture evenly.

Practical Tip:

• Work quickly to ensure the mixture doesn’t set before it’s properly placed.

Step 5: Level and Finish

1. Use a leveling tool to smooth the surface.
2. Create any desired texture or finish using a trowel.
3. Allow the concrete to set according to the manufacturer's recommendations.

Note:

• Avoid walking on the surface until it has fully cured to prevent damage.

Step 6: Curing the Concrete

• To ensure durability, cure the concrete by keeping it moist for several days.
• Cover with wet burlap or plastic sheeting to retain moisture.

Advice:

• Curing is crucial for achieving the porous properties and overall strength of the concrete.

Conclusion

In summary, creating porous concrete involves careful preparation, mixing, and finishing techniques. By following these steps, you can achieve an aesthetically pleasing and functional surface. For future projects, consider experimenting with different aggregate types or finishes to customize your porous concrete. Happy DIYing!