FIRST BREAK-IN SERVICE + QUICK PRE-RIDE CHECK UP: Triumph Bonneville T100

Introduction

This tutorial covers the essential steps for your first break-in service and a quick pre-ride check for the Triumph Bonneville T100. Completing these tasks is vital for maintaining your motorcycle's performance and longevity, especially after initial use.

Step 1: Perform the First Break-In Service

The first break-in service is crucial for your motorcycle. Here’s what it typically entails:

1. Inspection Checklist

   • Follow the checklist provided by Triumph, which includes checking various components to ensure everything is functioning correctly.

2. Check for Updates

   • Verify if there are any updates, recalls, or announcements from Triumph regarding your motorcycle.

3. Diagnostic Check

   • Connect your motorcycle to Triumph's diagnostic computer system. This step checks all systems on your bike and makes any minor adjustments needed.

4. Update Air/Fuel Mapping

   • If you have installed an aftermarket exhaust, your bike will receive an updated air/fuel map that is compatible with it.

Practical Tips

• Schedule your service at a certified Triumph dealership to ensure proper care.
• Expect to pay around $270 for this service.

Step 2: Conduct a Quick Pre-Ride Check

After your break-in service, it’s essential to conduct a quick pre-ride check. Here are the steps involved:

1. Check Oil Levels

   • Use the sight window to check oil levels when the engine is warm and not running.
   • Ensure the oil is between the two lines in the sight window.

2. Monitor Tire Pressure

   • Check your tire pressure regularly. Aim for a minimum of:
     • 32-34 PSI for the front tire
     • 36-42 PSI for the rear tire
   • Adjust based on personal preference but avoid dropping below the minimum for safety.

3. Inspect Chain and Sprockets

   • Check for any slack in the chain and lubricate it regularly to maintain performance.
   • Ensure that it is clean and properly adjusted.

4. General Visual Inspection

   • Look for any leaks or obvious issues, especially around the engine and the wheels.

Common Pitfalls to Avoid

• Do not ignore oil levels; consistently low oil can damage your engine.
• Overfill the oil; add small amounts at a time to avoid excess oil.

Step 3: Warm Up the Engine

• Before you ride, allow the engine to warm up. This helps circulate the oil and ensures the bike operates efficiently.
• Aim for the engine temperature to reach between 160°F and 180°F before starting your ride.

Conclusion

Completing your first break-in service and performing regular pre-ride checks are vital for the health of your Triumph Bonneville T100. Remember to check oil levels, tire pressure, and the chain regularly to ensure a safe and enjoyable riding experience. With these steps, you can enhance your motorcycle's performance and longevity, paving the way for many great rides ahead.