How To Install A Catch Can On Your Personal Water Craft Jet Ski

Introduction

This tutorial guides you through the process of installing a RIVA Racing catch can and engine breather kit on a 2018 Sea-Doo RXP-X 300 personal watercraft (jet ski). Installing a catch can helps prevent engine oil from entering the intake system, improving performance and reliability. This step-by-step guide will make the installation process straightforward, ensuring your jet ski operates at its best.

Step 1: Gather Necessary Tools and Materials

Before you begin the installation, make sure you have the following items ready:

• RIVA Racing catch can and engine breather kit
• Socket set
• Screwdriver set
• Pliers
• Clean cloths for handling parts
• Safety goggles and gloves

Step 2: Prepare the Jet Ski

• Ensure the jet ski is on a stable surface and secured.
• Disconnect the battery by removing the negative terminal to prevent any electrical issues during installation.

Step 3: Access the Engine Compartment

• Open the jet ski’s rear hatch to access the engine compartment.
• Remove any covers or components obstructing access to the intake system and existing breather hoses.

Step 4: Remove Existing Breather Hoses

• Locate the factory breather hoses connected to the engine.
• Use pliers to gently disconnect the hoses from their fittings. Be careful not to damage any components during removal.
• Clean the area around the connection points with a cloth to remove debris.

Step 5: Install the Catch Can

• Position the RIVA Racing catch can in an accessible location within the engine compartment.
• Connect the provided hoses from the catch can to the engine’s breather ports. Ensure a secure fit to prevent leaks.
• Use clamps (if provided) to secure the hoses at each connection point.

Step 6: Secure the Catch Can

• If the kit includes mounting hardware, secure the catch can using the screws provided. Ensure it is firmly in place and won’t move during operation.
• Double-check all connections to confirm there are no loose fittings.

Step 7: Reassemble the Jet Ski

• Replace any covers or components you removed earlier.
• Reconnect the battery by attaching the negative terminal.
• Close the rear hatch securely.

Step 8: Test the Installation

• Start the jet ski and let it idle for a few minutes.
• Check for any leaks around the catch can and hose connections.
• Ensure the catch can is functioning properly and that there are no unusual sounds coming from the engine.

Conclusion

You have successfully installed a RIVA Racing catch can on your 2018 Sea-Doo RXP-X 300 jet ski. This upgrade will help maintain engine performance by preventing oil from entering the intake system. Regularly check the catch can for accumulated oil and empty it as needed. Enjoy your enhanced riding experience! For further upgrades or maintenance tips, consider exploring additional resources or reach out to fellow enthusiasts.