Replacing and Adjusting Rollers on Gliding Patio Doors | Andersen Windows
3 min read
8 months ago
Published on Apr 22, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Replace and Adjust Rollers on an Andersen Gliding Patio Door
-
Gather Tools and Materials
- Find the installation guide that came with the rollers.
- Screwdriver or drill with Phillips bit.
- Large and medium to small flat blade screwdrivers.
- Work area that can support the door without scratching it.
- Someone to assist you.
- New rollers available from an Andersen dealer or at parts.andersonwindows.com.
-
Safety Precautions
- Do not attempt to lift and move the door panel alone.
- Lock the door securely to prevent it from tipping forward.
- Have someone available to assist you throughout the process.
-
Removing the Door Panel
- Use a Phillips screwdriver to remove the head stop while someone braces the door.
- Unlock the door and have someone strong on each side to tilt the door panel forward and out.
- Carry the door to your work area.
-
Replacing the Rollers
- Identify if your door has old-style or newer-style rollers.
- For newer-style rollers held in place by compression, use a medium flat blade screwdriver to release the barbs holding them against the wood inside the door.
- Remove the old rollers and dispose of them properly.
- Snap the new rollers into place, ensuring the adjustment screw side faces the right direction.
-
Reinstalling the Door Panel
- Carefully carry the door panel back to the doorway with assistance.
- Tilt the panel back into place, ensuring the rollers are positioned properly on the rail of the track.
- Lock the door securely and replace the inside head stop with the same screws.
-
Adjusting the Rollers
- Open the door approximately half an inch to assess the reveal or gap between the door frame and the door panel.
- Adjust the rollers accordingly:
- If the gap is wider at the bottom, raise the roller closest to the outside frame or lower the one closest to the center.
- If the gap is wider at the top, do the reverse.
- Make adjustments until the reveal is even and the door panel moves smoothly in the frame.
-
Final Steps
- Once adjustments are made and the door is aligned, close and lock the door securely.
- Test the door to ensure it moves smoothly and stays aligned.
-
Additional Resources
- For Andersen window or door parts, visit the online parts store at parts.andersonwindows.com.
- For questions about care, maintenance, or repairs, contact the Andersen customer care center at 888-888-7020.
By following these steps, you can successfully replace and adjust the rollers on your Andersen gliding patio door for smooth operation and proper alignment.