Firefly FFMN Full Setup and Fret Rework
2 min read
1 year ago
Published on Apr 30, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Tutorial: Setting up a Firefly FFMN Guitar
Step 1: Initial Assessment
- The Firefly FFMN guitar is from the second production run.
- Check the level of the frets and decide if a light fret level is needed.
- Clean the knife edges on the factory bridge and posts.
Step 2: Neck Adjustment
- Ensure the neck is perfectly level and straight.
- Fine-tune the neck using a straight edge.
- Allow the guitar to sit for 24 hours for the wood to adjust to the new truss rod tension.
Step 3: Taping Off the Neck
- Use wide tape to tape off the neck edges.
- Ensure the tape is close to the edge of the frets to avoid residue.
Step 4: Fret Leveling and Crowning
- Use 600-grit sandpaper to level and crown the frets.
- Use a fret guru to achieve a smooth and polished fret surface.
- Polish the frets using a dremel tool with polishing wheels.
Step 5: Stringing the Guitar
- Use D'Addario XY or XL strings for the Floyd Rose bridge.
- Cut the ball end off the strings for the locking piece.
- Adjust the string tension and bridge height accordingly.
Step 6: Bridge and Nut Adjustment
- Clean the bridge knife edges and posts.
- Adjust the locking nut height and bridge saddle height for proper intonation.
- Check the action height and adjust as needed.
Step 7: Final Checks and Customization
- Check the intonation and tuning stability after locking the nut.
- Adjust the string tree height if necessary.
- Customize the guitar with pickup covers and knobs as desired.
Step 8: Final Touches and Testing
- Ensure all components are properly set up for optimal playability.
- Test the guitar through an amplifier to check sound quality and playability.
- Make any final adjustments based on customer preferences.
Conclusion: By following these steps, you can effectively set up and rework a Firefly FFMN guitar to meet the customer's preferences and ensure optimal performance. Remember to customize and upgrade components based on individual preferences and needs.