Xtra® Autotransfusion System: Quick start
2 min read
21 days ago
Published on Feb 16, 2025
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial provides a quick start guide for the Xtra® Autotransfusion System. It is designed for healthcare professionals who need a concise overview of the operating procedures to facilitate intraoperative blood recovery. For complete instructions and detailed information, refer to the XTRA Operator’s Manual.
Step 1: Prepare the Equipment
- Ensure the Xtra® Autotransfusion System is in a clean and sterile environment.
- Check all components and accessories for damage or expiration.
- Gather necessary supplies including:
- Blood collection bags
- Filters
- Tubing
Step 2: Set Up the Machine
- Position the Xtra® Autotransfusion System near the surgical site for easy access.
- Connect the power supply and switch on the machine.
- Follow these steps to connect the blood collection system:
- Attach the blood collection bag to the system.
- Ensure all tubing is securely connected.
- Confirm that the filters are in place.
Step 3: Prime the System
- Before use, prime the system to remove air and ensure proper function.
- To prime:
- Open the clamps on the tubing.
- Allow saline solution or blood to flow through until all air bubbles are removed.
- Close the clamps after priming is complete.
Step 4: Monitor the System During Use
- Keep an eye on the system's display for any alerts or notifications.
- Regularly check the fluid levels in the collection bag.
- Ensure that the suction settings are properly adjusted based on surgical requirements.
Step 5: Complete the Procedure
- Once the surgical procedure is concluded, stop the blood collection process.
- Safely disconnect the collection bag from the machine.
- Follow proper disposal protocols for any used equipment and fluids.
Conclusion
This quick start guide provides the essential steps to operate the Xtra® Autotransfusion System. For comprehensive instructions, always refer to the XTRA Operator’s Manual. Ensure proper training and adherence to safety protocols before using the system in a clinical setting. For further information or support, visit the LivaNova website.