Create 5 Iconic Reverbs With Cubase Revelation Plug-in | Cubase Secrets with Dom

Introduction

In this tutorial, we will explore how to create five iconic reverb sounds using the Revelation plug-in in Cubase. These reverb types include drum room, vocal plate, vocal width, vintage spring reverb for guitar, and a lush reverb for synthesizers. This guide will provide you with step-by-step instructions to enhance your music production and make your mixes come alive.

Step 1: Set Up the Revelation Plug-in

• Open your Cubase project.
• Create a new audio track or select an existing one where you want to apply reverb.
• Go to the "Inspector" panel on the left side and click on the "Inserts" section.
• Select an empty insert slot and choose "Revelation" from the list of effects.

Step 2: Create a Drum Room Reverb

• In the Revelation interface, locate the "Room Size" control.
• Adjust the Room Size to a smaller setting (around 20-30%) to simulate a tight drum room.
• Set the "Damping" to a medium level to control high-frequency reflections.
• Experiment with the "Pre-Delay" to add a slight delay before the reverb effect kicks in (try around 30-50ms).
• Adjust the "Wet" and "Dry" mix to taste, typically around 20-30% wet.

Step 3: Design a Vocal Plate Reverb

• With Revelation still open, adjust the Room Size to a larger setting (around 70-80%).
• Increase the "Damping" to create a smoother sound, reducing harshness.
• Set the "Pre-Delay" to a lower value (10-20ms) for a more intimate sound.
• Tweak the "Wet" mix to about 40-50% for a lush vocal effect.

Step 4: Create Vocal Width

• To add width to vocals, duplicate your vocal track.
• On the duplicate track, apply Revelation with a slightly different reverb setting.
  • Set Room Size to 60-70%.
  • Keep Damping at a medium level.
  • Use a higher "Wet" mix (around 60-70%).
• Pan the original vocal track slightly left and the duplicated track slightly right to enhance the stereo image.

Step 5: Vintage Spring Reverb for Guitar

• Select your guitar track and insert Revelation.
• Set the Room Size to a small setting (20-30%).
• Use a higher "Damping" to emulate the characteristics of a vintage spring reverb.
• Set the "Pre-Delay" to around 15ms for a classic sound.
• Adjust the "Wet" mix to around 30-40%, ensuring it complements the guitar without overwhelming it.

Step 6: Lush Reverb for Synthesizers

• On your synthesizer track, insert Revelation.
• Increase the Room Size to around 80-90% for a spacious feel.
• Set Damping to a lower level to keep the reverb bright.
• Use a longer "Pre-Delay" (50-100ms) to allow the synth to shine through before the reverb kicks in.
• Max out the "Wet" mix to around 70-80% for a dreamy sound.

Conclusion

You have now learned how to create five iconic reverb sounds using the Revelation plug-in in Cubase. By adjusting parameters like Room Size, Damping, and Wet mix, you can tailor these reverb types to fit your music perfectly. Experiment with these settings in your own projects, and consider combining them for more complex sounds. Happy mixing!