[Solved] Fixing (C:) Stage 1| To skip disk checking, press any key | Disk checking on windows 10

Introduction

This tutorial provides step-by-step instructions to resolve the "Disk Checking on Windows 10" issue, particularly focusing on fixing the C: drive. This problem often arises when your system attempts to check the disk for errors during startup, and can be frustrating. Follow these steps to skip the disk check and repair your drive effectively.

Step 1: Use the Autocheck Command

The first method involves using the autocheck command to manage how Windows handles disk checks during startup.

1. Open the Command Prompt with administrative privileges:

   • Search for "Command Prompt" in the Start menu.
   • Right-click and select "Run as administrator."

2. Enter the following command:

   autocheck autocheck /k:C /k:D /k:E /k:F
   

   • Replace C, D, E, and F with the actual letters of your drives.
   • This command tells Windows to skip the checking for these specific drives.

Step 2: Exclude Drives from Checking

Next, you will use the chkntfs command to exclude the drives from automatic checks.

1. In the same Command Prompt window, type the following command:

   chkntfs /x C: D: E: F:
   

   • Again, replace C, D, E, and F with your drive letters.
   • This command prevents Windows from checking these drives during startup.

Step 3: Modify Startup Settings

If the problem persists, you may need to modify your system's startup settings.

1. Access the System Configuration:

   • Press Windows + R to open the Run dialog.
   • Type msconfig and press Enter.

2. Adjust the boot settings:

   • Navigate to the "Boot" tab.
   • Ensure that the option for "No GUI boot" is checked.
   • Click "OK" and then restart your computer.

Step 4: Check Disk for Errors Manually

You may want to run a manual disk check to identify any underlying issues.

1. Open the Command Prompt as an administrator.
2. Type the following command to check the C: drive:

   chkdsk C: /f /r
   

   • This command checks for errors and attempts to repair them.
   • You might need to reboot your computer for this to take effect.

Conclusion

By following these steps, you can effectively manage and prevent disk checking during startup on Windows 10. Use the autocheck and chkntfs commands to skip checks, modify startup settings, and ensure your drives are functioning correctly. If issues persist, consider running manual checks to maintain your system's health. For further assistance, keep exploring additional troubleshooting resources or consult with a tech professional.