Join 2 or 3 Cell Connections for 1 fast connection. Slate Router Smoothwan Installation
2 min read
8 months ago
Published on Apr 21, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Join Multiple Cellular Connections Using Slate Router with Smoothwan Installation
-
Introduction to Speedify and Slate Router:
- Erik Gulbrandsen introduces the concept of installing Speedify on the Slate ax router to bond two or more Cellular Connections for a more stable upstream connection.
-
Preparation:
- Purchase a consumer-grade Slate ax router.
- Connect the router to a power source using a USB power bank.
- Connect your cell phones to the router for bonded Cellular Connections.
-
Firmware Installation:
- Download the Smoothwan firmware from the Smoothwan website.
- Upload the firmware to the router, following the provided instructions.
- Change the settings to keep settings off during the installation process.
-
Connecting to Smoothwan Setup Wi-Fi:
- Connect to the Smoothwan setup Wi-Fi network using the SSID and password provided.
- Plug at least one WAN with internet access into the LAN port of the router.
-
Setting Up Wireless Connections:
- Connect to the 2.4 GHz network and save the settings.
- Update and install Speedify on the router.
-
Configuring iOS Device Connection:
- Disable the Smoothwan setup wireless connection to connect an iOS device to the 2.4 GHz network.
- Set up a personal hotspot on your iOS device with a password.
- Enable the hotspot and connect to it from the router settings.
-
Adding Additional Connections:
- Connect additional devices or hotspots to the router using available ports.
- Utilize different ports for different connections, such as T-Mobile hotspot, cell phone, and wireless network.
-
Optimizing Connections:
- Disconnect unnecessary devices to free up ports for additional connections.
- Ensure each connected device is properly configured and providing a stable connection.
-
Finalizing Setup:
- Test the connections to ensure all devices are properly connected and functioning.
- Troubleshoot any connectivity issues and adjust settings as needed.
-
Conclusion:
- Subscribe to Erik Gulbrandsen's channel for more tutorials and updates.
- Leave any questions or feedback in the comments section for further assistance.