Itak, da se da: PRALNI STROJ - menjava nivojskega stikala

Introduction

This tutorial guides you through replacing the level switch in a washing machine, a common repair that can help maintain the appliance's performance. Proper maintenance ensures longevity and efficiency, allowing you to enjoy reliable washing for years to come.

Step 1: Prepare for the Repair

• Unplug the Washing Machine: Always start by disconnecting the appliance from the electrical supply to ensure safety during the repair.
• Gather Necessary Tools: You will need:
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Replacement level switch
  • Towels (to catch any water spills)

Step 2: Locate the Level Switch

• Access the Back of the Machine: Move the washing machine away from the wall to access the back panel.
• Identify the Level Switch: Look for the component that controls the water level, typically located near the water inlet.

Step 3: Remove the Old Level Switch

• Unscrew the Panel: Use the screwdriver to remove screws holding the back panel in place.
• Disconnect the Level Switch: Carefully unplug the wiring harness from the old level switch. You may need to squeeze the clips to release it.
• Remove the Switch: Unscrew the switch from its mounting position.

Step 4: Install the New Level Switch

• Position the New Switch: Secure the new level switch in the same location as the old one.
• Reconnect the Wiring Harness: Ensure that the wiring is firmly connected to the new switch. Check for a snug fit to prevent any issues.

Step 5: Reassemble the Machine

• Reattach the Back Panel: Screw the back panel back into place securely.
• Position the Washing Machine: Carefully push the machine back to its original position.

Step 6: Test the Repair

• Plug in the Machine: Reconnect the appliance to the power supply.
• Run a Test Cycle: Start a washing cycle to ensure that the new level switch is functioning correctly. Monitor the water fill levels to verify proper operation.

Conclusion

Replacing the level switch in your washing machine is a straightforward task that can enhance its efficiency. By following these steps, you can perform the repair safely and effectively. If you encounter any issues, consider consulting a professional technician or referring to your machine's manual for further guidance. Regular maintenance and timely repairs will help prolong the life of your appliance.