How to select the media type on a Roland TrueVis printer

Introduction

This tutorial will guide you through the process of selecting the appropriate media type on a Roland TrueVis printer. Knowing how to choose the correct media type is essential for achieving optimal print quality and ensuring that your prints adhere correctly to the chosen material.

Step 1: Access the Printer Menu

1. Power On the Printer

   • Ensure that the Roland TrueVis printer is turned on and fully operational.

2. Navigate to the Menu

   • Use the printer's control panel to access the main menu.

3. Select the Media Settings

   • Look for the option labeled "Media" or "Media Settings" and select it.

Step 2: Choose the Media Type

1. Review Available Media Types

   • Once in the Media Settings, you will see a list of available media types. This may include options like vinyl, photo paper, or canvas.

2. Select the Appropriate Media Type

   • Scroll through the options and select the media type that matches the material you are using for your print job.
   • Tips:
     • Ensure you’re familiar with the specifications of the media you are using to avoid any mismatches.

Step 3: Adjust Settings Based on Media Type

1. Check Additional Settings

   • After selecting the media type, review any additional settings that may be required.
   • This could include adjusting the print speed, quality, and temperature settings based on the selected media.

2. Confirm Your Selections

   • Once all settings are adjusted, confirm your selections to save them.

Step 4: Perform a Test Print

1. Run a Test Print

   • To ensure that everything is set up correctly, perform a test print on the selected media.
   • Monitor the print quality and adhesion to confirm that the correct media type was chosen.

2. Make Adjustments if Necessary

   • If the test print does not meet your expectations, revisit the media type and settings. Adjust as needed and retest.

Conclusion

Selecting the correct media type on a Roland TrueVis printer is a straightforward process that can significantly impact the quality of your prints. By following these steps—accessing the menu, choosing the right media type, adjusting settings, and performing a test print—you can ensure optimal results for your projects. For more advanced techniques and troubleshooting tips, consider exploring additional tutorials in the TrueVis playlist or visiting the Signmaster Systems website.