DIY Tutorial Belajar Cara Membuat Sabun Batang Minyak Kelapa Organik | 100% Coconut Oil Soap Bar

Introduction

This tutorial will guide you through the process of making 100% coconut oil soap bars using a simple recipe. With just three main ingredients, you can create your own organic soap at home. This DIY project is not only fun but also allows you to customize your soap for personal use.

Step 1: Gather Your Materials

Before starting, ensure you have the following ingredients and tools ready:

Ingredients

• 165 grams distilled water (you can use amidis water)
• 73 grams NaOH (sodium hydroxide, also known as lye)
• 500 grams coconut oil (preferably organic cooking oil)

Tools

• Digital scale
• Measuring jug
• Silicone spatula
• Silicone molds or acrylic molds
• Soap cutter
• Safety equipment (gloves, mask, goggles)
• Tea strainer (optional, for later use)

Step 2: Prepare the Lye Solution

1. Safety First: Always wear gloves, a mask, and eye protection when handling NaOH, as it can be harmful.
2. Mix Lye with Water:
   • In a well-ventilated area, slowly add the NaOH to the distilled water.
   • Important: Always add NaOH to water, never the other way around, as it can cause a dangerous reaction.
   • Stir gently until the NaOH is completely dissolved. The solution will heat up as the lye dissolves.

Step 3: Melt the Coconut Oil

1. Heat the Oil:
   • Measure out 500 grams of coconut oil.
   • Gently heat the oil until it is fully melted. You can do this in a microwave or on a stovetop.
2. Cool the Oil:
   • Allow the melted coconut oil to cool to around 37-43°C (98-110°F). This temperature range is ideal for mixing with the lye solution.

Step 4: Combine Lye Solution and Coconut Oil

1. Mix Together:
   • Once both the lye solution and coconut oil are at the right temperature, slowly pour the lye solution into the melted coconut oil.
2. Stir:
   • Use the silicone spatula to stir the mixture thoroughly until it reaches a trace. Trace is when the mixture thickens and leaves a trail on the surface when drizzled.

Step 5: Pour into Molds

1. Prepare Molds:
   • Ensure your silicone or acrylic molds are clean.
2. Pour Soap Mixture:
   • Carefully pour the soap mixture into the molds.
   • Tap the molds gently to remove any air bubbles.

Step 6: Cure the Soap

1. Cover and Insulate:
   • Cover the molds with a towel to keep them warm. This helps the saponification process.
2. Wait:
   • Allow the soap to sit for 24-48 hours until it hardens.
   • After curing, remove the soap from the molds.

Step 7: Cut and Store the Soap

1. Cut the Soap:
   • Use a soap cutter to slice the soap into bars.
2. Cure Again:
   • Let the soap bars cure in a cool, dry place for 4-6 weeks before use. This allows any remaining lye to neutralize and the soap to fully harden.

Conclusion

Congratulations! You've successfully made 100% coconut oil soap bars. Remember to follow the recipe precisely and take safety precautions seriously. Enjoy your homemade soap, and consider sharing your experience on social media by tagging @monimici. If you want to explore more soap-making techniques, consider looking into private classes for advanced formulas. Happy soaping!