07-13 Silverado Must Do Upgrade

Introduction

In this tutorial, we'll guide you through upgrading the driver information center on a 2010 Silverado LT trim truck. This modification allows you to access important vehicle data such as fuel range and average economy that are typically only available in higher trim levels. By following these steps, you can enhance your driving experience with added functionality.

Step 1: Gather Your Tools and Parts

Before starting the installation, ensure you have the following items ready:

• New driver information center panel (available on Amazon)
• Trim panel removal tool
• Screwdriver (if needed for your specific vehicle)
• Optional: a cutting tool if you choose to modify the existing panel.

Step 2: Remove the Old Trim Panel

• Use the trim panel removal tool to gently pry off the existing trim panel.
• Focus on the edges and sides to avoid damaging the panel.
• Carefully detach any connectors for the switches located at the back of the panel.

Step 3: Disconnect the Old Switches

• Identify the old switches in the panel.
• Detach the dimmer switch and any other connected switches by pulling them out carefully.
• Note that the existing switch may not be plugged in, acting as a dummy plug.

Step 4: Prepare the New Panel

• Unbox the new driver information center panel.
• If required, cut out a section of the panel for the driver information switch using a cutting tool. This can be avoided if your new panel has the necessary opening.

Step 5: Transfer the Light Switch

• Take the light switch from the old panel.
• Use the trim panel tool to peel back the tabs securing the light switch.
• Once loose, install the light switch into the new panel by snapping it into place.

Step 6: Install the New Panel

• Align the new driver information center panel in the dash.
• Ensure all connectors are properly plugged in.
• Gently press the panel into place until it snaps securely.

Step 7: Test the New Features

• Start the truck and check if the driver information center is functioning.
• Scroll through the new options including fuel range, average economy, trip information, and tire pressure.
• Make sure all features display correctly and that the panel feels securely installed.

Step 8: Customize Settings (Optional)

• Explore the settings available through the new panel to adjust door locks, lighting, and other preferences.
• Reset your oil life and check engine hours if needed.

Conclusion

You have successfully upgraded the driver information center on your 2010 Silverado LT trim. This modification not only enhances your dashboard's functionality but also allows you to monitor important vehicle metrics. For future enhancements, consider other upgrades that could improve your truck's performance or aesthetic. If you found this tutorial helpful, be sure to check back for more upgrades and modifications to enhance your vehicle!