How to Fix "No Internet, Secured" WiFi Error in Windows 10 [2024]

Introduction

This tutorial will guide you through resolving the "No Internet, Secured" WiFi error on your Windows 10 device. This issue often arises after a Windows update and can affect various devices, including laptops and desktops from brands like Dell, HP, and Lenovo. Follow the steps below to troubleshoot and fix your connection issues effectively.

Step 1: Restart Your Computer and Router

• Begin by restarting your computer.
• Unplug your router from the power source and wait for about 30 seconds before plugging it back in.
• Allow the router to fully reboot and then check if the internet connection is restored.

Step 2: Forget and Reconnect to the WiFi Network

• Go to Settings by pressing Windows + I.
• Click on Network & Internet.
• Select Wi-Fi from the left panel.
• Click on Manage known networks.
• Find your WiFi network and click on it, then select Forget.
• Reconnect to your WiFi network by selecting it from the available networks and entering the password.

Step 3: Run the Network Troubleshooter

• Open Settings again (Windows + I).
• Navigate to Update & Security and select Troubleshoot.
• Click on Additional troubleshooters.
• Select Internet Connections and click Run the troubleshooter.
• Follow the prompts to diagnose and fix any detected issues.

Step 4: Update Network Adapter Drivers

• Press Windows + X and select Device Manager.
• Expand the Network adapters section.
• Right-click on your wireless adapter and select Update driver.
• Choose Search automatically for updated driver software.
• If an update is found, follow the prompts to install it and then restart your computer.

Step 5: Reset TCP/IP Stack

• Open the Command Prompt as an administrator. You can do this by searching for "cmd" in the Start menu, right-clicking on it, and selecting Run as administrator.
• Type the following commands one by one, pressing Enter after each:

  netsh int ip reset
  netsh winsock reset
  ipconfig /release
  ipconfig /renew
  ipconfig /flushdns
  

• Restart your computer after executing these commands.

Step 6: Check Network Settings

• Go to Settings > Network & Internet > Wi-Fi.
• Click on Hardware properties.
• Ensure that the IP assignment is set to Automatic (DHCP) and the DNS server assignment is also set to Automatic.

Step 7: Disable IPv6 (if necessary)

• Open Network and Sharing Center by right-clicking on the network icon in the taskbar.
• Click on Change adapter settings.
• Right-click on your WiFi network and select Properties.
• Uncheck Internet Protocol Version 6 (TCP/IPv6) and click OK.
• Restart your computer.

Conclusion

By following these steps, you should be able to resolve the "No Internet, Secured" WiFi error on your Windows 10 device. If the issue persists after trying all these methods, consider checking for hardware issues or contacting your internet service provider for further assistance. Keep your system updated to avoid similar problems in the future.