CARA SETTING TENDA N301 LEWAT KOMPUTER 2023 MUDAH - SETTING ROUTER TENDA

Introduction

This tutorial provides a comprehensive guide on how to set up the Tenda N301 router using a computer. The steps outlined here will help you configure various modes such as Access Point, Repeater, and more, ensuring that you can effectively extend your Wi-Fi network. Whether you're a beginner or looking to optimize your existing setup, this guide will provide clear instructions to make the process easy.

Step 1: Preparing for Setup

• Gather necessary equipment:

  • Tenda N301 router
  • Computer (laptop or desktop)
  • Ethernet cable (optional, for wired connections)

• Ensure you have the default login credentials for the router. Usually, the default username is admin and the password is also admin.

Step 2: Connecting to the Router

• Connect your computer to the Tenda N301:
  • If using a wired connection, plug one end of the Ethernet cable into your computer and the other into one of the LAN ports on the router.
  • For a wireless connection, look for the default Wi-Fi network name (SSID) on your device, typically labeled on the router.

Step 3: Accessing the Router's Web Interface

• Open a web browser on your computer.
• Type the router's IP address in the address bar, usually 192.168.0.1 or 192.168.1.1, and press Enter.
• Log in using the default credentials (username: admin, password: admin).

Step 4: Configuring Basic Settings

• Navigate to the "Basic Settings" or "Network" section in the router's dashboard.

• Set up your internet connection:

  • Choose the connection type (PPPoE, Static IP, etc.) based on your ISP's requirements.
  • Enter the necessary information such as username and password for PPPoE, if applicable.

• Save your settings.

Step 5: Setting Up Wireless Configuration

• Go to the "Wireless" settings section.

• Configure the following:

  • SSID: Change to your desired Wi-Fi network name.
  • Password: Set a secure password for your Wi-Fi network.
  • Channel: Choose a channel (typically auto works well).

• Save your settings.

Step 6: Configuring Advanced Modes (Optional)

Depending on your needs, you can set up the router in different modes:

Access Point Mode

• Navigate to the "Operation Mode" section.
• Select "Access Point" mode.
• Connect the router to your existing network via an Ethernet cable.

Repeater Mode

• In the "Operation Mode" section, select "Repeater."
• Scan for available networks and connect to your existing Wi-Fi network.
• Enter the password for your existing Wi-Fi.

WISP Mode

• Select "WISP" mode from the operation mode options.
• Connect to your ISP’s network and configure the settings as needed.

Step 7: Finalizing Settings

• After configuring the desired mode, ensure all settings are saved.
• Restart the router to apply changes.

Conclusion

You have now successfully set up your Tenda N301 router! Whether using it as a standalone router, access point, or repeater, these steps will help you maintain a robust internet connection. For further enhancements, consider exploring parental controls, guest networks, or firmware updates. If you encounter any issues, refer to the troubleshooting section in the router's manual or visit the Tenda support website for more guidance.